Sign in to follow this  
templehound

The vulture in the cabinet

Recommended Posts

I made this knife seven or eight years ago and it has a story behind....

I thought of a fighter design that has potential to work.

10 inch blade ground  of 1.2552, copper and Steller bone....about 16 inches overall length.

I covered the ricasso and  shoulders with clay to prevent the spot from hardening and keep it tough.After heat treating I discovered that the border of the clay made a  groove in the bevel near the back...too deep to get it out.I checked with a magnifying glass, if it was  a fatal crack, but it was none and I accepted the beauty flaw....the blade was ground too good and the steel too rare to sort it out and start from scratch because of a beauty flaw.

At this time I collected  experiences with more complex ferrules, like this temple ferrule, which is inspired by ancient Thai temple architecture.

They are lots of effort and difficult to make.

The bone I chose had some smaller surface cracks, that didnt concern me and I kept on fitting it to the ferrule.

The small surface cracks never went out, they stayed at my side while deep grinding the form until to the finish....and kept cracking, i filled them up and went to a knife show in Germany.

It still had no sheath but I wanted to show it...I was so proud on that knife......at the show I explained at least 10-15  times that it is no crack in the blade....while I looked at the bone that kept on real cracking. That was no wonder because it came from tropic humidity to German dry weather, in even dryer exhibition rooms....On the second day I could watch it crack further...it was visible! .... while I listened to the good response for the knife and kept on explaining that its no crack in the blade....

Back home in Thailand I wondered where my pride and love for the knife disappeared.....flaw on the blade, in the bone...on my mind:blink:

Disappointed, I  stored it in the darkest corner of my cabinet. 

I covered it with gun fat and in 7 years I only took it out about 4-5 times to renew the gun fat.

A few weeks ago it came to my mind and I checked on it....still no stain, bone stopped cracking, good condition overall....I looked at the flaws and I had no emotions.

I decided to draft it into service.

First I cleared a tree root in the soil that was in the way of some concrete vegetable bed casting in our garden. Several times the edge bit into stones, some sparks flying....that left some minor scars in the edge and a slightly bend to the tip that was too thin from the start....this blade took very little damage compared to what I did with it....and that fighter can chop!

So the sheath is new.I made it  with belt clip and retension spring. The wood is Padouk and can be taken out of the  the ray skin quiver loop for maintenance.....and I had fun working the ray skin horizontally.It gave me a natural outline and dynamic size growth of the bone buds towards the middle.....dyed to some reptile-dino-camouflage, that I like a lot....while the knife has something of a vulture....nothing beefy but powerful.

 

Now after that knife showed me its potential, I strongly have the feeling, I missed something the last seven years....but better late then never.

Cheers

Te1,k..jpg

Te2a,k..jpg

Te3,k..jpg

Te4,k..jpg

Te5,k..jpg

Te6,k..jpg

Te7,k..jpg

Te8,k..jpg

Te9f,k..jpg

Te9,k..jpg

Share this post


Link to post
Share on other sites

The knife is, as always, a work of art.  The story is the blade version of the ugly duckling.   It was beautiful the entire time....it is perceptions that change.

Share this post


Link to post
Share on other sites

Absolutely love the way that handle looks. Truly a beautiful blade.

Share this post


Link to post
Share on other sites

One of those projects that just need to wait for the stars to align right to finish up. Turned out great all around. 

Share this post


Link to post
Share on other sites

Way beyond my skill level. A truly beautiful and functional work of art.

Share this post


Link to post
Share on other sites

Lou L,  I am glad You remind me of this children's fairy tale....a very nice comparison.

Thanks for the fine comments, Gentlemen, they are much appreciated!:D

 

 

Te2d,k..jpg

Share this post


Link to post
Share on other sites

Beautiful work and a great story.  Really love the blade shape and have built similar before in my own style.

 

Glad to see you bring it out of the cabinet and put it to work.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this