L.Blouin Posted March 6, 2019 Share Posted March 6, 2019 I need a crosshead for The Canadian Giant No. 25 and a pitman. If I knew the distance between the holes on the crosshead I might be able to make one and the dimensions of the pitman would be helpful too. Can anyone help me? Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted March 6, 2019 Share Posted March 6, 2019 Welcome to IFI... sorry I can't help you with the hammer but this thread will help you get the best out of the forum. READ THIS FIRST Quote Link to comment Share on other sites More sharing options...
JNewman Posted March 7, 2019 Share Posted March 7, 2019 I am pretty sure the Canadian Giants were Little giants made under license here in Canada in Kitchener. So a 25 Lb little giant sizing will be the same and you may be able to buy one from Little Giant if you want. Quote Link to comment Share on other sites More sharing options...
Broad River Forge Posted March 21, 2019 Share Posted March 21, 2019 I made one myself for my Canadian giant 25 pounder, If you still need info i can send pics and a description of how i built mine, no lathe or milling unit just a welder and hole saw needed. worked great Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted March 21, 2019 Share Posted March 21, 2019 Welcome to IFI Broad River Forge, If you edit your profile to show your location we won't have to dunn you for it when answers are dependent on where in the world you are located. This thread will help you get the best out of the forum. READ THIS FIRST Quote Link to comment Share on other sites More sharing options...
Teknition1 Posted July 12, 2021 Share Posted July 12, 2021 Just in case anyone else stumbles into this thread looking for some info on the cross head, there is a machinist on youtube that goes through milling out a rough casting. It is a 7 part series and covers many of the required measurements. Link below to part#1, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.