19Branden86 Posted December 8, 2018 Share Posted December 8, 2018 Forged a small pry bar from 16" of coil spring. I left the body normalized and only hardened the pry feet. Tempered them back to blue. Seems to work well. Quote Link to comment Share on other sites More sharing options...
ausfire Posted December 9, 2018 Share Posted December 9, 2018 Not wishing to pry … but what's on the other end? Maybe a split chisel type foot for nail pulling? Nice job anyway. Quote Link to comment Share on other sites More sharing options...
19Branden86 Posted December 9, 2018 Author Share Posted December 9, 2018 Ausfire, thank you. No, this one I didn't put a crow foot on. I work full time as a welder. The parts I weld are on jigs and as we all know, heat expands, so sometimes they need a little coaxing to get out of the jig. That's what I made this one for. I like the pun you did there Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.