Clover Saint Posted November 30, 2018 Share Posted November 30, 2018 Picked this 98, or 89 pounder up off of eBay earlier this month. Beautiful face in great condition. As far as measurements the face is 6x10, stands 5 1/2 inches tall. Really can’t wait to find a suitable stump for this beaut! Don’t mind the slight rust marks, they really aren’t deep, just surface gunk. And a quarter for comparison in the second photo. Cheers all! Quote Link to comment Share on other sites More sharing options...
njanvilman Posted November 30, 2018 Share Posted November 30, 2018 Fisher Sawmaker's anvil. If used for general blacksmithing, be very careful with hammering as the faces are very hard. These were intended to be used to tune sawblades with the blade always between the anvil and hammer. The anvil was always protected by the blade. Quote Link to comment Share on other sites More sharing options...
Clover Saint Posted November 30, 2018 Author Share Posted November 30, 2018 5 hours ago, njanvilman said: Fisher Sawmaker's anvil. If used for general blacksmithing, be very careful with hammering as the faces are very hard. These were intended to be used to tune sawblades with the blade always between the anvil and hammer. The anvil was always protected by the blade. Yeah that much I know, really only intend it for certain things. Not necessarily a work horse. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.