Jump to content
I Forge Iron

Should I paint my restored Buffalo Forge 615 post drill . . .


Recommended Posts

 . . . or should I leave the wire-brushed finish?

Do me a favor and as you reply (Please give the reasons for your opinion, too) quote this:

Paint:    0                 No Paint:      0

And change the total to reflect how your opinion changes the totals thus far.  That way I won't have to try to keep a total in case this thread goes long

as they sometimes do when asking for opinions.

Please be honest and just add one number to the appropriate total, as you will probably never see my post drill, but I do value your opinion as much as the next guy's.

When I decide what to do and get my new (old) drill mounted, I'll post pics.

Link to post
Share on other sites
21 hours ago, ThomasPowers said:

As I don't know what you plan to do with it I can't give an opinion.

Shop Use.  I bought a Kimbark at auction and followed that up with the Buffalo Forge before restoring the Kimbark, then cleaned up the Buffalo Forge first as it was a simpler piece of machinery.  I'm not calling it the start of a collection, but one never knows.  Present plans are just to set it up on a post with a stand as a moveable piece of shop equipment and use it.  I bought a used straight shank Jacobs chuck for it, so it's not going to look original between uses, although the chuck is easily removeable.  I'll post pics once I get it mounted.

 

Daguy

Link to post
Share on other sites

OK for shop use I would paint it with an oil based enamel or other "implement" type paint; but not worry about highlighting and pinstriping. Especially if your shop is not kept condensation free as it sounds like you are near humidity!

No paint 2.    Paint 1

Link to post
Share on other sites

Greetings Deguy,

           I have many post drills . 5 very functional in different shops . Others just to look at. . Most of the ones I restore I leave natural cleaned and oiled with tung oil. I have one that I painted and detailed just for fun . Enclosed a picture of a rear flywheel Columbia . A rare find.  Have fun with your new hobby. 

Forge on and make beautiful things 

Jim

 

 

2A488A16-97D4-492C-8EEC-364D714CD382.jpeg

F44F9E5A-21CF-4E67-8506-E856FF086425.jpeg

39773ED1-CEF6-406F-9EA9-909E7BAB8717.jpeg

Link to post
Share on other sites
13 hours ago, ThomasPowers said:

it sounds like you are near humidity!

Thomas Powers:

Oh, yeah!  Michigan definitely sees it's humidity

 

Jim Coke:

Is that last pic of a Kimbark?  Mine has that same "Top Gear, Drop Pawl configuration for the vertical drive, though it's a two speed manual drive, not a belt drive, so it's probably a little older.  I've just started tearing it down and cleaning it up, but it seems to be a more intricately built design than the Buffalo Forge 615.  I'm having a lot of fun returning these machines to useable condition.

Once I get the Kimbark back in shape, I'll decide which one I want to keep, and maybe gift the other one to my brother. Or Not.

Went by the builder box store this morning and got a 5" X 5" X 8' timber to mount it to. Now I just have to figure out how I want to build the base

The finish on that rear flywheel drill looks like the finish I'm getting on both drills

 

Daguy

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...