Quenchcrack Posted April 7, 2005 Share Posted April 7, 2005 Check out this site: http://www.davistownmuseum.org/TDMtool.htm A very nice, short history of metallurgy and lots of good stuff on ancient hand tools. Of course, these old tools look pretty modern to us old Geezers..... :D Quote Link to comment Share on other sites More sharing options...
Ten Hammers Posted April 11, 2005 Share Posted April 11, 2005 Bob, thanks for the link. I'm still somewhat confused about Bessemer after reading it but I think I'll now have the motivation to look further. Regards, Ten Quote Link to comment Share on other sites More sharing options...
Shane Stegmeier Posted April 11, 2005 Share Posted April 11, 2005 Bessemer is simple:-) Melt a huge amount of ore, dump it into a tundish, drop a couple oxygen lances into it, blow pure oxygen into the load (Impressive and scary... which burns out all of the impurities, like carbon, sulfur, and phosphorus:-) then throw in your alloying packets, roll the tundish to the job and pour your steel. The scary thing is you can do it on a small scale if you are crazy:-) or have LOTS of safety equipement ready. (Atleast that is what I think I remember:-) Quote Link to comment Share on other sites More sharing options...
Quenchcrack Posted April 13, 2005 Author Share Posted April 13, 2005 Actually, Bessemer used compressed air. When large quantities of Oxygen became available, the Basic Oxygen Furnace was created. It is simlar to the Bessemer Converter but much faster and hotter. The rapid oxidation of the iron raises the temperature of the iron considerably. After blowing your heat, you must do something about all the dissolved oxygen you now have in your iron. You must add silicon or aluminum to combine with the oxygen and form little silicates and aluminates. This will give you a sound ingot. Failure to kill the steel will result in the oxygen eating up all of your alloys and an ingot full of holes. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.