The Legend Posted February 25, 2018 Share Posted February 25, 2018 I would like everyone’s opinions on my burner thanks DC471049-2FC6-4CA2-BA0D-D23E44DA7304.MOV 04B2E633-E599-4150-8EA5-CB6387A06A0D.MOV Quote Link to comment Share on other sites More sharing options...
Joey smith Posted February 25, 2018 Share Posted February 25, 2018 It looks good but I’m am amateur! Quote Link to comment Share on other sites More sharing options...
MotoMike Posted February 25, 2018 Share Posted February 25, 2018 It looks good to me. Your take on a Reil burner. Is that an adapter between the pipe and the reducer? a coupler for a flare? Is the coupler contoured inside or just threaded on. what is your reducer and pipe size? As a qualifier, I know enough to be dangerous. Quote Link to comment Share on other sites More sharing options...
The Legend Posted February 25, 2018 Author Share Posted February 25, 2018 Yes I flared the inside of the tip machined it to a 15° angle on the inside I did the same thing with the adapter up the top that way there’s a nice angle to bring in more air in no sharp corners The pipe size is three-quarter inch Quote Link to comment Share on other sites More sharing options...
The Legend Posted February 26, 2018 Author Share Posted February 26, 2018 A5692F9A-865E-47C1-AE01-50121BA2038B.MOV Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted February 26, 2018 Share Posted February 26, 2018 Hi Legend, I'm sure the burner experts will weigh in. In the mean time you might read through this thread to get the best out of the forum. https://www.iforgeiron.com/topic/53873-read-this-first/ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.