Sign in to follow this  
bajajoaquin

Forging a Teacher's Key Ring

Recommended Posts

I mentioned in another post on how to make a swivel that I want to make a big ring for holding teacher's keys as a present for my sister-in-law when she finishes her teaching credential. I am broadly modeling it on my wife's brass ring that her grandmother used when she was a teacher. Rather than have a seamless brass ring, I'm intending to forge square bar to round, add a leaf and then make the ring by twisting the loops together.

I'm fairly limited as a blacksmith, having only dabbled over the years and mostly made things from other peoples' examples. As a result, I'm not sure the best sequence of forging operations to use. I've drawn out my plan, and I'd appreciate comments. I'm looking at the ring now, and will probably add in questions for the hook and the swivel, when those come.

Some notes: ring will be about 5" in diameter, which comes to about 17.25" in circumference. adding in material for the leaf, stem, taper, loops and wraps, my finished length should be about 22-23". Stock will be 3/8" bar ultimately forged to 3/8" round (except for the leaf, stem, and taper).

Pictures attached for reference. You might note that my forging ability is rivaled by my sketching ability!

1. Forge steep taper for leaf shape.

2. Isolate taper for body of leaf

3. Draw out stem of leaf to 1/8" or so for about 3"

4. Forge 3/8" square to 3/8" round for the length of 17.25" from end of leaf stem. Mark with center punch at that point

5. Taper to point 3.5" long, cut off remaining

6. Flatten and vein leaf

7. Forge mostly round

8. Bend leaf back and twist to loop

9. Bend opposite side taper to fit through loop

10. Twist taper around ring to secure

11. Planish/true ring on horn

What are your thoughts on this? Changes? Additional Detail?

forge1.jpg

forge2.jpg

IMG_7911.jpg

Share this post


Link to post
Share on other sites

First thing I'd note is weight.  Steel is heavier than brass, so a 5" ring that's made of steel, and has all the extra mass added with the leaf and twists.... well, that might not be something a woman is comfortable toting around.  Women are weird about how "heavy" things are, and it's odd that they find things heavy that menfolk think nothing about.  

Going from 3/8 square to 3/8 round serves what purpose?  Why not start with 3/8 round?  If you're interested in texturing the steel with hammer blows.... that can easily be done even when you start with round bar.  I'd opt to go with something smaller than 3/8 diameter bar since that's pretty substantial for no particular gain.  I think 5/16" bar would be too thick and heavy visually, and would likely go with 1/4" to get a balance between weight and strength as well as keeping the design "feminine".

Sometimes the best design is the most simple design.  Joining the ends with simple curls interlocking would be easy enough for someone with limited time/experience and would come out looking very nice.  It's understated elegance that still showcases the blacksmith's trade.

Share this post


Link to post
Share on other sites
1 hour ago, VaughnT said:

 Women are weird about how "heavy" things are, and it's odd that they find things heavy that menfolk think nothing about.  .

Truth!!

I made a little leaf key fob for my wife that hooks over the edge of her purse, to keep her keys handy. While she thought it was beautiful, she mentioned how heavy it was on several occasions over the course of a couple of weeks... finally, she must have developed enough muscle to lug that chunk of iron around... no more comments about it, other than her friends and coworkers all want one now.. :rolleyes:

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

Sign in to follow this