humphreymachine Posted January 15, 2018 Author Share Posted January 15, 2018 I think you are correct Foundryman. On closer examination the body of the one on the right appears to be wood and probably the example on the left as well. Link to comment Share on other sites More sharing options...
njanvilman Posted January 15, 2018 Share Posted January 15, 2018 I have several original wooden patterns displayed with actual anvils made from them. That is the wood pattern that made the one next to it. The largest saw anvil listed in the Fisher catalog is 700 lb. I have never seen any larger than ~500 lb. I doubt they made too many of them. I added one photo of how the weight was stamped in on these anvils. This is a 100 lb Fisher sawmaker's anvil. I did recheck some and only about half have the weight markings. Fisher stocked anvils in the common 50 lb increments, but they offered almost 75 standard sizes. If they did not have what you wanted in stock, they could make it with a two week window. They kept hundreds of patterns ready to go. Link to comment Share on other sites More sharing options...
humphreymachine Posted January 15, 2018 Author Share Posted January 15, 2018 Great information. They don't appear to have incorporated the integral handles in the larger sawer's anvils(although I could see an advantage in having two handles(one at each end) on the larger ones). Any idea what the cutoff weight for integral handles was? Link to comment Share on other sites More sharing options...
njanvilman Posted January 16, 2018 Share Posted January 16, 2018 2 hours ago, humphreymachine said: Great information. They don't appear to have incorporated the integral handles in the larger sawer's anvils(although I could see an advantage in having two handles(one at each end) on the larger ones). Any idea what the cutoff weight for integral handles was? I will check out my anvils tomorrow and see what the range was with handles. Link to comment Share on other sites More sharing options...
ThomasPowers Posted January 16, 2018 Share Posted January 16, 2018 I would think that the larger ones would be in a permanent shop and so not moved around much if all; while the smaller ones might carried from location to location and so handles would be a plus. Link to comment Share on other sites More sharing options...
bolensboneyard Posted January 7, 2019 Share Posted January 7, 2019 Looking to pick up a Sawyers anvil of some size. I have two Peter Wright anvils but want to tune the big saw blades used on older saw mills. Anyone know of one for sale? Please email me at bolensboneyard@comcast.net thanks Bobby. I also would like to know what type of hammer would have been used to do the task. I have been told a rounding hammer, what most refer to as a knifemaker's hammer, the Japanese dog style hammer and a hammer that looks like a cross peen with a rounded off cross end??? Thought I would go to the experts for the right answer. Link to comment Share on other sites More sharing options...
RobS Posted January 7, 2019 Share Posted January 7, 2019 At the mill I worked at, we used a cross/straight peen hammer. The faces were pretty squared with only a slight rounding. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now