upsetter Posted January 6, 2018 Share Posted January 6, 2018 Picked this chunky swage block up last spring and finally got some time to make a proper stand to use it. The block is roughly 12” x 18” x 6”. I fabbed up the stand from a bunch of drops and scrap from work. It positions the top and long side at a 27.25” working height , while stood up on the short side it’s a 30” tall working height. Should work out well since I’ve got to use next week. Quote Link to comment Share on other sites More sharing options...
Ranchmanben Posted January 7, 2018 Share Posted January 7, 2018 Saw that on insta, killer work. What’s that block weigh? Quote Link to comment Share on other sites More sharing options...
upsetter Posted January 7, 2018 Author Share Posted January 7, 2018 Thank you Ben. It’s about 260ish, I’ll weigh them both this week . Quote Link to comment Share on other sites More sharing options...
George Geist Posted January 7, 2018 Share Posted January 7, 2018 Nice job. Is it working out good for you? George Quote Link to comment Share on other sites More sharing options...
upsetter Posted January 7, 2018 Author Share Posted January 7, 2018 2 hours ago, George Geist said: Nice job. Is it working out good for you? George Thanks George, I haven’t gotten to really use it heavily yet but it should be about perfect. It’s about an inch lower than the anvil I use for sledge work . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.