jason0012 Posted December 25, 2017 Share Posted December 25, 2017 I have this old forge that is not complete. I have done some research but have come up blank on the missing parts. All I really have is the pan and pedestal. I have built a Bob Patrick firepot but wanted to inquire one last time if anyone can explain what is missing in enough detail to replicate them. I am also torn between trying to recreate the down draft system with a good blower or use a more conventional chimney and side draft hood Quote Link to comment Share on other sites More sharing options...
David Einhorn Posted December 25, 2017 Share Posted December 25, 2017 Try this thread: Quote Link to comment Share on other sites More sharing options...
desmato Posted January 4, 2018 Share Posted January 4, 2018 Not sure if it will help but here's a pic of it in an old catalog i found in the interwebs.... I was researching a downdraft/powered vent system myself. Quote Link to comment Share on other sites More sharing options...
jason0012 Posted January 30, 2018 Author Share Posted January 30, 2018 Well, it's done now. The fabricated fire pot works really well. Oddly, this is the first time in 20 yrs or so that I have used a modern commercial style firepot. Quote Link to comment Share on other sites More sharing options...
JHCC Posted January 30, 2018 Share Posted January 30, 2018 Very nice! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.