ausfire Posted August 8, 2017 Share Posted August 8, 2017 Been doing a few ram's head and bull's head bottle openers at my demos lately. I usually get them right but one the other day just didn't work out well - the loop on the opener end was a bit too thin. I was going to consign it to the scrap but found a use for the bull's head end. Attached to a horse shoe they make quite a reasonable double wall hook. So all was not lost. Sometimes mistakes can work out well. Made one with the ram's head as well ... Quote Link to comment Share on other sites More sharing options...
Brasso Posted August 8, 2017 Share Posted August 8, 2017 Nice work Aus! Good key holders I reckon... Or Dolphin torch holder... right beside the door! Quote Link to comment Share on other sites More sharing options...
j-v Posted December 29, 2017 Share Posted December 29, 2017 nice !! Quote Link to comment Share on other sites More sharing options...
ausfire Posted December 29, 2017 Author Share Posted December 29, 2017 Thanks j-v. Sometimes mistakes can be rescued. Quote Link to comment Share on other sites More sharing options...
BlasterJoe Posted January 1, 2018 Share Posted January 1, 2018 Those are really cool and. I made some of those for the craft fair but I make them lucky side up. “ flipped from your design”. With the hook swooping out,down then up. I don’t know if it would work with the heads. Might though. Quote Link to comment Share on other sites More sharing options...
Daswulf Posted January 1, 2018 Share Posted January 1, 2018 Good save on those Aus. I like the idea. Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.02282a54c88e6a190e3ce9545787d4bf.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.