Scrambler82 Posted July 24, 2017 Share Posted July 24, 2017 Was out walking on Sunday and came across small layout of an old western ranch, The Vale Ranch, not too far from my land. Took a few pictures but was both surprised and happy to find a good size Peter Wright sitting in the Smithy, had the "England" in the side markings and if I have read correctly on this site that would mean after 1910. Also weight markings were 2 - 3 - either 5 or 25 = (2 X 112) + (3 X 28) + 5 = 313 or 333 lbs. biggin ! Here are a couple of pictures: Demos every Tuesday... Guess where I will be on Tuesday next ! The Smithy Post Vice with 50's era Fordson Tractor in the back ground ! I think the propane forge is a little newer than the Smithy setup ! The Drill Press is nice ! The Peter Wright: Not in bad shape, didn't do a bounce test but it looked in good shape ! Climbed over the chain and got a close up ! Looks like 2 - 3 - 5 or 25, either 313 or 333 lbs, a good size Anvil ! Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted July 24, 2017 Share Posted July 24, 2017 Interesting anvil stand, looks like poured concrete. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.