GMoore Posted June 3, 2016 Share Posted June 3, 2016 New shop coming up. Have floor poured - 6" base with a 10" power hammer locale - and a 6" skirt around the interior portion (18' X 20') and an 8' X 18' covered and paved porch. It will have double doors on one end and a sliding door leading to the porch. A Tuff Shed structure will be put up in about a week (10' side walls). One window and a roof vent. As soon as it is up, I'll wire it with 110 volt and 220 volt, put ion lights, and a ceiling fan. And, in this shop, will go a coal forge, a gas forge, 2 swage blocks, an anvil, a Mig welder, a gas welder, and an arc welder, a couple of drill presses (powered), a hand drill press, a 25 lb. Little Giant, a trip hammer, grinders, a large tool box, and other things. Will send photos as things develop. Quote Link to comment Share on other sites More sharing options...
GMoore Posted April 7, 2017 Author Share Posted April 7, 2017 And, my 360 square feet structure is plumb full. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted April 7, 2017 Share Posted April 7, 2017 Don't worry; you'll be able to say the same when your shop is 360' on a side... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.