Jump to content
I Forge Iron

Recommended Posts

Ladies and Gents this is one of very first projects I have undertaken and I am pretty pleased with the outcome, I don't know what to call it!!! I was given a piece of steel girder, cut one end off and started making the axe!  

There is a surprising amount of weight behind it but obviously it dosn't have enough weight behind it to be used as a splitter!!  I still have a couple of pieces of girder left and was going to make a couple more axes! so please throw in any criticism as it is appreciated!

Thanks - Don Kutter 

Girder 1.jpg

axe1.jpg

Link to post
Share on other sites

Hard to tell from your photo, but is the eye a complete cylinder?  If not the force of using the tool will work that wood loose in time.  I would probably term this a tomahawk based on the eye shape, but that is just nit picking.

The shape you have achieved it pretty good for a first effort, good job spreading the edge laterally.

You probably have not done any heat treating as the girder used is most likely not high carbon steel.  Edge retention will be limited due to this, though it certainly matches some of the period hawks that were used as trade items here in the states.  Better tools had hardened steel pieces forge welded to the cutting edge to act as bits.

Link to post
Share on other sites

Hey Latticino sadly the eye doesn't wrap completely around but it is something that I could work on, I needed something to cut wood for the fire and didn't have the money to buy an axe so thought I would go and head and give it a go. 

I tried to heat treat it a little but not sure if I got it completely right and like you said if the steel is good enough! I have a couple more of the girders knocking around so could try and make another if you have any ideas for improvement!! I was thinking of shortening the whole thing but I don't want to lose too much weight! 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...