GottMitUns Posted April 23, 2015 Share Posted April 23, 2015 Here is a bic iron and RR anvil I made today. The blacksmith group I work with wants 3-4 RR anvils for beginners and I had some time today.I sank a piece of 1" sq tubing into the face to make a 3/4" hardie hole. The rail was new and had no work hardening on the face so I didn't lose anything by milling part of it flat. Russell Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted April 23, 2015 Share Posted April 23, 2015 Nice work, with that power hammer I think I would have gone a differnt rout on the anvil, but nice work despite our "creative diferences" Quote Link to comment Share on other sites More sharing options...
GottMitUns Posted April 23, 2015 Author Share Posted April 23, 2015 I really really thought about trying to draw the horn out on the hammer but,,,i might try welding some handles on to the next one and give it a go. Russell Quote Link to comment Share on other sites More sharing options...
Charles R. Stevens Posted April 23, 2015 Share Posted April 23, 2015 If you use 1" radie fullers and set the horn down 1/2" on each side, then draw out the resulting slug to a 2" cone, say 6"long. Gives the rail anvil a destictivly Iron age look. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.