Jump to content
I Forge Iron

FISHER #4 Double Screw Vise pattern


Recommended Posts

These are the two patterns for the #4 Fisher double screw vise.  The patterns are sitting in their carriers.  When used, the half was rammed up using special dedicated flasks.  Then the whole assembly was flipped over, the carrier removed, and the other special flask half was attached.  The second half was then rammed up.  If you own a #4 Fisher Vise, it was made using this pattern.IMG_20150303_142954373.thumb.jpg.b3fe7b5

You might notice that the "tooth" is not on the front (left) pattern.  In the later years, the pattern was modified and that part was eliminated.  The front vise jaw was totally supported by the screws.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...