Jump to content
I Forge Iron

Recommended Posts

How many things can be made from a RR spike, and still be recognized as a RR spike

Share this post


Link to post
Share on other sites

Anything you can leave the head on. How good is your imagination is the real question.

Frosty The Lucky.

Share this post


Link to post
Share on other sites

Knives, Forks, Axes, Coat hooks, Fire pokers, Figurines, are the obvious ones but as Frosty said almost anything you can imagine. 

Share this post


Link to post
Share on other sites

Only one thing and still look like a railroad spike---a railroad spike.

Now, recognized as made from a railroad spike---what Frosty said.  ;)

Share this post


Link to post
Share on other sites

I saw an interesting RR spike implement somewhere on the web the other day.  The head had the usual twisted handle but the rest was split in two and drawn out into two claws.  It was a garden cultivator, something I wouldn't have thought of.

Share this post


Link to post
Share on other sites

I wouldn't know about garden tools the last time I tried gardening I got arrested,never again!

Share this post


Link to post
Share on other sites

that because ya forgot to get the growers permit Duck.

Edited by Steve Sells

Share this post


Link to post
Share on other sites

Hmm...wonder if you could forge with charred hemp stalks. Apparently hemp is pretty much good for everything :D.

Share this post


Link to post
Share on other sites

With proper credit to the Kootenay Blacksmiths Association.  I keep a print of this out in the smithy for inspiration.

KootenayRailroadSpikeContes.jpg

Share this post


Link to post
Share on other sites

The Dragonfly is awesome, how do you think they cut that prior to forging? If you cut down the length on 2 sides, that would be 4 pieces for the wings, but how did they get the body? Maybe cut twice down on side and then cut only 1/2 of those the other way? Hmmm, I'll have to think about that...

And what is that in the upper right?

Share this post


Link to post
Share on other sites

when I've done dragonflys I'll hacksaw down from one end at an angle, the wider end of the cut leaves more material for the wings. That wide section is then bent up out of the way of the "tail" and, after it cools off, sawn in half again to make the two sides of the wings.  I've seen guys do it with a thin hot cut chisel but I have to use the saw.

2012-11-24_17-27-40_469.jpg

Share this post


Link to post
Share on other sites

Upper right is a small post vice. 

I have experimented wit drawing them out to make steel axe and hammer handles ala Eastwing. With scales and using the head as a heal cap. 

i love the garden tools 

Share this post


Link to post
Share on other sites

what I like about rr spikes is it helps you learn how much material you have and how far it will go, and they are dirt cheep to play around with .

why was the print so small ?

 

Edited by winginit

Share this post


Link to post
Share on other sites

for me, its about the perfect amount of material for making very handy small tongs !  i usually nip the head off the spike but i guess you can leave it at the end of the rein, if you want to show its origin

DSC06404.jpg

DSC06408.jpg

 

very useful material

Share this post


Link to post
Share on other sites

for me, its about the perfect amount of material for making very handy small tongs !  i usually nip the head off the spike but i guess you can leave it at the end of the rein, if you want to show its origin

DSC06404.jpg

DSC06408.jpg

 

very useful material

​wow that's great I didn't think they would go the far . I have yet to make a set of tongs guess I am chicken .I know they will be ugly .

Share this post


Link to post
Share on other sites

An old friend of mine asked me to make a rail spike knife for him, I normally tell people that I don't make knives so this is my first. I don't have the experience and materials to make what I would consider a proper knife so I told him its more for the look. 

74854

74853

Share this post


Link to post
Share on other sites

Technicus, thanks for sharing that video! A local blacksmith just told me about it this past weekend, and I'm looking at attempting this when I fire up the forge this weekend (need a set that's a bit more reliable for spikes).

Frozenforge, that's a really awesome handle. Care to share how it was done for us newbies?

 

As for the original topic: the others already put in a lot of good details. My wife found that a number of people make hatchets and gardening tools, so she's been pestering me to get more practice in to make these things. I've seen some snakes, wall/coat hooks, and I might be using spikes to make handles for my tool stump.

Share this post


Link to post
Share on other sites

There is a video on Youtube showing how to do that twist that explains each step. 

Search " Rubix Cube twist blacksmith " will pull up a few. 

Also check out " Pineapple Twist Blacksmith" also, that one is pretty cool as well and the guy shows how to do it very clearly.

I have yet to try either one, but that is due to my complete lack of being able to hot cut anything even remotely straight, Need to work on that skill first...

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...