Jump to content
I Forge Iron

Anvil 4inch square post anvil identification


Recommended Posts

:confused:Hello Guys and ladies,
I have just purchased a small post anvil from ebay and I AM TRYING TO FIND OUT ANYTHING ABOUT ITS ORIGINS OR HISTORY.
Has anyone come across one of these before? Dont know if it is ministry of defence or war department item, this info in the description may just be a red herring.
Any help would be greatfully recieved Thanks Ivan (hammerandtongs)





IT was DESCRIBED AS FOLLOWS:
square topped anvil block that looks to be unused. Item has no markings or casting marks, came with other old X WD MOD tools that were put away in storage 50 to 65 years ago. All edges are sharp and not marked. A book of matches gives and idear of size.

Bottom 6 x 6 x 6"inches,( 15 x 15 x 15 cm, )

Top 4 x 4 x 2.5" inches, ( 10 x 10 x 6.5cm ) very heavy item 20kg.

Link to post
Share on other sites

tHANKS FOR YOUR REPLIES GUYS.
I can honestly say if this turns out to be a riser block and not a small anvil Im going to be pretty disappionted.I hade intended to use it as a striking face anvil i.e. used as a small portable anvil. Guess ive only myself to blame .Having said that the discription did include the word anvil. Seems like I may have purchased a riser block and not a small brick type anvil. Sill maybe I can harden up the top if it turns out to be too soft .....

Regards Ivan (H&T)

Link to post
Share on other sites

Hi Ive now got the said item. The top block (seperates from the lower 6 inches by 6 inches by 6 inch base) is a hardened and machine ground block-measuring 4 by 4 inches by 2.5 inches high.. shows fine dull yellow sparks the top block shows no impresion when a centre punch is hammered onto the top face. The lower base part has a cast middle with a thick steel plate about 1/2 and 3/4 inch thickness sandwiching the casing. Internal support flanges cast in the inside of sandwiched casting. Weighs about 40lbs.Not sure if I weld the whole thing together top block to base it would withstand the blows if used as a post anvil? IM guessing that a casting is not the best to resist shocks being transmited ?
What I wanted was a post anvil.
Regards Ivan Thanks for your replies thus far.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...