Jump to content
I Forge Iron

Hugh McDonald Steel Rolling Mill


Recommended Posts

I have looked at all the posts on this forum concerning the Hugh McDonald rolling mill and most of the pictures have disappeared. I was hoping to start a new thread with the possibility of chatting with people that have built one to ask questions and see pictures. I have Mr. McDonald's book and have been going over it. I will soon be doing a solid model of his design.

Link to comment
Share on other sites

  • 3 weeks later...

I have started gathering materials for this build. Currently I am trying to do this project with what is available in my scrap pile. I have cut and ground the up-right pieces and the base for the roller

2s.jpg.b103723ec7d17e2b05bb682b9ad70429.jpg

After cutting, grinding and milling this is what they now look like.

IMG_3995s.thumb.jpg.1c6589bba6ff3f59f990e7a55f5da888.jpg

After looking through my shop I actually found a 40 to 1 reducer.

IMG_3951s.thumb.jpg.a9195915bda9df88786ad3c0cd969ac1.jpg

In the bearing cabinet I came across a set on 1 1/4 inch bearing that will work for the main roller.

IMG_3991s.thumb.jpg.5afdfa3f5a2c5ad0e43dfcfc7285db9a.jpg

I also hit the neighbors supply of junk and he had a set of Harley sprockets and I had the chain to go with them.

IMG_3994s.thumb.jpg.484110ee17b05321c2a65fbe17761cf2.jpg

I am not sure if I need this extra reduction or not.

In the scrap pile was also the material for the base. On the saw and being cut to size.

IMG_3960s.thumb.jpg.570b1acde7853fa0afbef9adfbdd9181.jpg

IMG_3953s.thumb.jpg.50f475692fd262e58bce239fe9d8d1ac.jpg

going to the motor storage area I found a 5hp 3 phase motor.

IMG_4073s.thumb.jpg.ccbe5ad105a206d4318349f7cc10296b.jpg

IMG_4074s.thumb.jpg.84ab581a35ad64f862b8b85ce7a5d18e.jpg

 The funny thing is that I just got a call from a friend that had a 7.5 hp rated VFD.

I think that I am on the way now.

Link to comment
Share on other sites

  • 2 months later...

Good thread.  I am planning on building one before too long.  I will also be purchasing the plans, but money is tight rite now.  

Anyway, I was wondering about the upper roller bearing, if I understand correctly the original plans call for boring holes in bronze blocks.  Is there some reason doing the same with mild steel won't work?  I know bronze is a lot slicker than steel, but would putting a grease fitting in and greasing the fire out of it help, or would it still want to gaul?  I will have to look, but I may have some red brass flanges that are large enough to turn bushings out of.

Thanks.

Link to comment
Share on other sites

Got the plans, haven't been able to get the video to work yet, but the PDF file has pretty much everything I need.  I have a couple of sets of pillow block bearings that are the right size I'm going to rob off an old spreader wagon.  I'm planning on using some hydraulic shafting that is about 2 1/4" or so.  What did everybody use for their rollers?  The plans say mild steel will work, but I don't think I have any that size.  I'm planning on grinding the chrome off the hydraulic shafting before truing it up in the lathe.

Plans are nice, just wish they were in inches and not metric, but not a big deal.

Link to comment
Share on other sites

  • Glenn locked this topic
  • Mod42 unlocked this topic

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...