Ben Hoover Posted March 6, 2019 Share Posted March 6, 2019 On 7/12/2017 at 12:21 PM, SLAG said: In my opinion tong making from scratch is not a good first project. S- hooks are a good one. You need to to draw out and twist to make a sexy one. Bottle openers are a good second project. They usually require punching and drifting in their manufacture. Slag, I wish this post had been here when I first started. All the Youtube videos said 'best thing to do first is make your own tongs'. Well, after a couple days I realized just how bad that advice was, and I swallowed my pride and ordered some from Kens. Best decision I ever made. I then began making bottle openers and practicing twists and such on them. Took less that half a dozen and I was turning out some bottle openers that I am quite happy with. I will eventually make some tongs. But the hammer control and eye required to make tongs is significantly higher than that required for a bottle opener, J or S hook or even a snail. As for a knife... that will come in time, but I am NOT going to waste money on steel so I can screw it up. So... guess who has a box of RR Spikes to practice on? When I get to where I am moving those well and they are turning out the way I expect, THEN I will take my coil springs and make some paring knives to start, then move on to other blades. But man... bottle openers are FUN!! Tongs just make me think I need to go sit in the back of the short bus. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted March 6, 2019 Share Posted March 6, 2019 I like starter projects that *work* for a beginner---sets the hook *deep*; ah was that my outside voice??? Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 6, 2019 Share Posted March 6, 2019 5 hours ago, Ben Hoover said: Tongs just make me think I need to go sit in the back of the short bus. Nah, you're doing just fine the way you are. Keep pushing the envelope, you'll get where you want to go. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
Ben Hoover Posted March 6, 2019 Share Posted March 6, 2019 I'm having fun. And I am going to do tongs eventually. Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted March 6, 2019 Share Posted March 6, 2019 You don't learn the limits, unless you push the limits. Quote Link to comment Share on other sites More sharing options...
shrike Posted March 6, 2019 Share Posted March 6, 2019 Another problem with tongs as a beginner project is that there are specific tricks to tongs that are the sum of many skills. If you are working on your own I highly recommend Mark Asperys book number one. He goes though the very basics, step by step. Much better than any other books or videos I can remember. Quote Link to comment Share on other sites More sharing options...
Illerob Posted June 12, 2019 Share Posted June 12, 2019 On 7/16/2014 at 4:16 PM, Jack-O-Lantern said: If you use charcoal and have to get store bought then do not use bricket charcoal. Use natural wood chunk charcoal. I recommend royal oak brand. The other stuff is like a spark fountain and dos'nt heat the metal very well. Thats it guys. Any tips would be appreciated. Good luck. Terms corrected from "Coal" to "charcoal" because they are not the same thing, also edited for language violation I just watched a video on you tube, specifically said to use briquettes they were of much more uniform heat. I do know that royal oak gets much hotter. That seems to be my major concern, producing enough heat. What is your feeling on that matter. Enough heat is my concern, would the un even heat matter to me? Not so long as it was higher temp resulting. IMHO Quote Link to comment Share on other sites More sharing options...
MrTMichaud Posted June 12, 2019 Share Posted June 12, 2019 Briquettes have too much clay as binder. Lump is the way to go if you use charcoal. Quote Link to comment Share on other sites More sharing options...
SLAG Posted June 12, 2019 Share Posted June 12, 2019 Mr. Illerob, Briquettes, are a mixture of charcoal dust, glue, ( = binder " ), sometimes colorants, and sometimes sparkle dazzling bits. (like potassium nitrate, (KNO3), which also enhances the ability of the mix to catch fire. This admixture of many non-combustible components bulks up the product. But it lowers the heat generating properties of the product. In other words, you need more briquettes to get your stock (steel), to forging temperatures. So there is, probably no savings for using briquettes over the initially more expensive lump charcoal*. Also, you can make your own charcoal, from scrap wood, cut-offs, and pallets. There is much site material, on this site), for doing that. Anyone can post information on YouTube. Much is wrong including the reference you site. Briquettes are no more efficient in producing even heat. There is a list of suggested, knowledgeable, Youtube 'authors' on this site, somewhere. Use your favorite search engine and put " i.f.i." into your search string. check it out. SLAG. *there is always a counter example to be found that proves the rule,. YouTube has a video where an experienced smith uses briquettes to get steel hot enough to forge weld the steel, proving it is possible. But it is not recommended. Quote Link to comment Share on other sites More sharing options...
Frosty Posted June 12, 2019 Share Posted June 12, 2019 Yeah, you CAN use briquettes but it has issues that make it more difficult. As said, there are binders holding the briquette shape, milk glue, wood pulp, anthracite, etc. aren't a big deal. The lime powder on the other hand is there to reduce the temperature, prolong the burn time and turn white so you know the fire is going. I've used them, welding included but it's far from ideal. Lump charcoal is easier to light, produces a hotter though shorter lived fire and unless you're careful tends to burn your steaks. Making charcoal is no big deal depending on the size of the batch and closeness of your neighbors. The FD might drop in if you get carried away too. Once you get a handle on how fire works and what you need to make it do forge work you can learn to burn anything flammable. Camel dung to coal and weirder stuff is in every day use somewhere. Out of date feed corn behaves surprisingly like coal, it sticks together as it pyrolizes into charcoal so you can make a closed / beehive fire. Moose dung works but you have to collect a LOT and they scatter it all over the darned forest. Frosty The Lucky. Quote Link to comment Share on other sites More sharing options...
ConstructionK88 Posted September 16, 2019 Share Posted September 16, 2019 My first forge was fire bricks, wood, and a large centrifugal fan. My first item was an 10" paper thin dagger from rebar using a 5# maul. After a 10 year hiatus my new forge is oil fired, decorative fireplace brick, and a blow dryer fan. My first project was a set of tongs using flat security bar stock and a small tinners hammer. Bassakwards every step of the way but I did learn a lot. When it comes to metal use what's known if you can and learn about the metal you have. Never use a hammer you don't like just because it's what everyone else uses. Don't drool over a fancy 500$ anvil if a 16in section of rr track hasn't failed you even once. A forge is what you think it should be. If it heats to your needs then it's a forge. Make what makes you happy. And rebar is a God awful material but if you have 2000+lbs of the stuff, like me, use it! Also it's a great idea to study and research everything before jumping in. Don't copy something someone else made because you like it. Odds are they are more experienced, have better materials, and more time. Make it yourself, in your own way to match what you want and need. Have your own style and you'll never be disappointed!! Quote Link to comment Share on other sites More sharing options...
Roguesec Posted January 20, 2020 Share Posted January 20, 2020 So I'm new here. Just built my first forge dual burner about 2-1/2 foot long about 8 inches long four inches wide. Still a newb but having fun. Made my first blade today after dialing in my home forge burners. Any tips for a novice? Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted January 20, 2020 Share Posted January 20, 2020 Best tip at this point is to read this. READ THIS FIRST It will help you get the best out of the forum and how to keep the moderators happy. Quote Link to comment Share on other sites More sharing options...
Roguesec Posted January 20, 2020 Share Posted January 20, 2020 Thank you iron dragon I'm from Kerrville Texas just to let everyone know. Pics of my first blade here shortly Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted January 20, 2020 Share Posted January 20, 2020 Great you will learn we love pictures, might start a thread in Knife Making about your adventure into making it. Quote Link to comment Share on other sites More sharing options...
Ben Wells Posted April 26, 2020 Share Posted April 26, 2020 Soo much great advice here. Interesting reading that tongs shouldn't be an early project, for me it was about the third thing I attempted (my first pair worked out much better than my second). I think my first pair took around 10 to 15 hours to complete, last pair around 3 While I hadn't picked up on the rebar thing yet I can say that as a newbie to the art, buying an expensive alloy steel suited to punches was one of my first mistakes. Yea I didn't think about how I was going to harden it. Finding the 10XX steels good to play with though Quote Link to comment Share on other sites More sharing options...
Jay Tomos Posted May 10, 2020 Share Posted May 10, 2020 Hey Jack, that post sums up my view on starting out in the wonderful world of moving hot Metal into a thought out shape so you can stand back and say, "I did that". I too am new to this forum and the world of smithing/metalwork but I have had the passion for a long time to try my hand at it. I am a self employed carpenter by trade and I have many a times thought should I have chosen to be a blacksmith at college, but I cant remember that being a given option. I totally agree with you, people starting out shouldn't be put off by others that have fully decked out workshops with hydraulic presses and big blue's moving serious amounts of steel. I don't think anyone could say they went to bed one night thinking they would try a bit of smiting and woke up to a fully kitted out workshop. My point being everyone started somewhere and how ever you develop your skills should be at your own pace and of course budget. I admit I had been put off for many years taking up the hobby thinking I needed to have big expensive equipment after watching many of folk on YouTube! But it's not really the case to start off I think it's just the case of using what your comfortable using learning at your own pace and setting yourself realistic goals. So in a nutshell your post was a delight to read Jack and I hope it will encourage more people to take the plunge and not be put off by not having expensive equipment. Quote Link to comment Share on other sites More sharing options...
Irondragon Forge ClayWorks Posted May 10, 2020 Share Posted May 10, 2020 Welcome aboard Jay... Sadly Jack-O-Lantern hasn't been back on the forum since 2017, however your post will be read by many other folks and remembered. Quote Link to comment Share on other sites More sharing options...
George N. M. Posted May 10, 2020 Share Posted May 10, 2020 We all started somewhere and generally it was with some pretty basic tools and little or no skill. As we practice we gradually out grow our basic tools and begin to upgrade. A JABOD and charcoal will do to learn how to make S hooks and bottle openers but is probably not up to making billets of pattern welded alloy steel. Similarly, a fancy induction or high end propane forge is too much tool for a beginner to learn with. Skills and tools go hand in hand and upgrade together. "By hammer and hand all arts do stand." Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted May 11, 2020 Share Posted May 11, 2020 Well a JABOD-ish thing and charcoal and single action bellows were what forged all the pattern welded swords in the early middle ages in Europe. The difference is mainly skill and experience. I've done a pattern welded billet using a claw hammer and a short chunk of RR rail. Charcoal sieved from desert bonfire remains and an improvised forge. Quote Link to comment Share on other sites More sharing options...
John B Posted May 11, 2020 Share Posted May 11, 2020 The phrase "All the gear, and no idea" springs to mind. Get it HOT and Hit it, and learn from there. Different degrees of Hot, and different amounts of Hit, it's in there somewhere, you just have to find it. Watching helps, Doing will get you there. Guidance will help, Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted May 11, 2020 Share Posted May 11, 2020 Watching someone who knows what they are doing helps. Watching someone who doesn't know what they are doing, may be amusing; but generally doesn't help. Quote Link to comment Share on other sites More sharing options...
John B Posted May 11, 2020 Share Posted May 11, 2020 True Thomas, I should have qualified the statement by adding the "someone who knows what they are doing" unfortunately I was not thinking of via internet or TV programmes, My Mistake. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted May 11, 2020 Share Posted May 11, 2020 Can be live too. I was at a SOFA meeting once and the demonstrator was making a tool of HC steel as part of his ornamental demo. But he was treating the HC like it was mild, too hot/too cold plain water quench and then handed it around. I noticed that it had cracked from end to end and pointed it out to him and was told "It will do for this job."---Broke on the second hammer blow. He mainly worked mild doing ornamental work. I came in by the way of blades and so my habits are to treat everything like it was HC---I really have to fight that using WI! Quote Link to comment Share on other sites More sharing options...
John B Posted May 11, 2020 Share Posted May 11, 2020 Hi Thomas, just because they are demonstrating, does not mean they are expert, I don't know who the demonstrator was but if he is demoing and treating MS like HC then that is a problem in itself If it is cracked, then you were right to point it out, and unless it was annealed after and before it was ready for using on a job, then it was in a potentially dangerous state, was this pointed out by him/her? If the "job" was a wall mounting or static not to be handled item, then maybe in their opinion "It would do" was valid, but a bit of a cop out for doing a job to be proud of, I could not envisage a customer being happy with an obviously flawed item, smacks of lack of pride in one's work. If its HC then forge it for its structure, if its MS then same applies, and also for WI. Each has its own composition and should be worked accordingly, difficult to know on uknown metals, but that's why we test sample potential workpieces. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.