territorialmillworks Posted December 1, 2013 Share Posted December 1, 2013 I finally made some rounding hammers from 1045. Being in a hurry and not being a purist, I first profiled them on the lathe. After drifting the eye, I chucked them back in the lathe and dressed them up with a flap sander. Total cost $30. Fast, easy and cheap. Quote Link to comment Share on other sites More sharing options...
swedefiddle Posted December 1, 2013 Share Posted December 1, 2013 Good Morning, Don't be impatient, a little extra time now pays off HUGE down the road. My favorite is "the Roinding Hammer". :) :) Neil Quote Link to comment Share on other sites More sharing options...
Francis Trez Cole Posted December 1, 2013 Share Posted December 1, 2013 nice to have the time and a lathe they look great Quote Link to comment Share on other sites More sharing options...
VaughnT Posted December 3, 2013 Share Posted December 3, 2013 Very nice work. No reason to not use a lathe if you have it handy! Quote Link to comment Share on other sites More sharing options...
Jakesshop Posted December 3, 2013 Share Posted December 3, 2013 Now I have another reason to get a lathe... Nice work! Quote Link to comment Share on other sites More sharing options...
Kaalo Posted December 5, 2013 Share Posted December 5, 2013 Those are some gorgeous hammers you made sir. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.