Jump to content
I Forge Iron

Recommended Posts

Looks a lot like the first generation of my forge.

 

I agree with ThorsHammer - make the tuyere longer.  Also, I cut a hole in the bottom of a soup can that slipped over the tuyere and the nozzle on the hair dryer.  Only seconds to set up and take down, and you don't have to fuss with tape (if that's what you used.  I'm not 100% sure from the pic).

 

I used the angle iron from a bedframe or two that I got for free from Craigslist to make a forge table.  You could also make a stand for the firepot out of the same stuff if you like.  I made my forge in two pieces (table and pot) so that I could move it around easily.  If you don't weld (I don't), it's pretty easy to drill a few holes and bolt it together. 

Link to post
Share on other sites

Instead of raising your anvil and forge, why not go with the Eastern route and keep it low. All you have to do is sit down on a comfy stool and your anvil will be at a great height.  There are tons of videos on the net showing third-world smiths doing great work while sitting and squatting!

 

Stand your track anvil on end, secured to a 4x4 that's buried a bit, and you'll have a stable, relatively quiet anvil that's as good as you can ask for.  And it will be more efficient!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...