Chris Covington

Made a couple of striking anvils this weekend

Recommended Posts

Myself and Stan Bryant spent all day saturday making a pair of striking anvils.  The striking plates were cut from a couple of old fork lift tines.  They were 2x4x12.  We drilled a 3/4 hole and then drifted it to 1 inch square.  We actually assembled the stands first using 2 pieces of 1/2 inch plate welded together for the base and 2 inch thick walled square tubing filled with sand for the legs.  We used a torch to cut a squarish hold slightly larger than one inch to drift through. 

 

KuNVftY.jpg

 

QSix2cV.jpg

 

rWkbP9D.jpg

 

GwXnEXJ.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.