Nick Posted July 27, 2013 Share Posted July 27, 2013 Those are impeccable! What are the dimensions of the eyes? Link to comment Share on other sites More sharing options...
VaughnT Posted July 30, 2013 Share Posted July 30, 2013 That is some seriously nice work, and the quality of the photography really sets it off. The progression pics document the builds perfectly. When my forge is back up and running, I can see me trying my hand at it. Thank you very much. Link to comment Share on other sites More sharing options...
Matthew Paul Posted September 6, 2013 Author Share Posted September 6, 2013 The eye is marked out, 1 1/8" for the first side of the eye, 3/4" for the poll, 1 1/8" for the other side, and 1" for the scarf/weld. Link to comment Share on other sites More sharing options...
HIGHSIDER Posted September 24, 2013 Share Posted September 24, 2013 Great thread, thoroughly enjoyed going through it and studying the different phases.. Very well done & thanks for sharing Link to comment Share on other sites More sharing options...
Matthew Paul Posted November 30, 2013 Author Share Posted November 30, 2013 Thanks Highsider. I've finished two more since then. Link to comment Share on other sites More sharing options...
jeremy k Posted November 30, 2013 Share Posted November 30, 2013 Fine piece of work there Matthew Link to comment Share on other sites More sharing options...
Matthew Paul Posted December 9, 2013 Author Share Posted December 9, 2013 Thank you Jeremy. Link to comment Share on other sites More sharing options...
Rhettbarnhart Posted December 11, 2013 Share Posted December 11, 2013 You inspired me to forge my first axe today,thank you;your work is incredible! Link to comment Share on other sites More sharing options...
Matthew Paul Posted December 12, 2013 Author Share Posted December 12, 2013 Thank you Sir. Do you have any photos of it? My work did not start out that way, and I can still improve a lot. But, practice pays off. Link to comment Share on other sites More sharing options...
Rhettbarnhart Posted December 16, 2013 Share Posted December 16, 2013 for some reason I cant put a link on but there are pictures on the thread"first axe" Link to comment Share on other sites More sharing options...
eggwelder Posted February 1, 2014 Share Posted February 1, 2014 you`ve set the bar for me. when i can achieve that level....those are beautiful tools the forge welding is still eluding me Link to comment Share on other sites More sharing options...
Norcal Posted March 5, 2014 Share Posted March 5, 2014 That is some lovely work, The pics of your process are very nice too. Thank you for posting them! Seeing the process is helping me get my thoughts in order to try this in the future. Link to comment Share on other sites More sharing options...
Jon Kerr Posted January 10, 2019 Share Posted January 10, 2019 Sorry to resurect an old thread- but I found this incredibly helpful. The progression photos for your method of making a bearded axe are fantastic, thanks! Can't wait to have the skill and tools to try this! Link to comment Share on other sites More sharing options...
Mike Thurston Posted January 10, 2019 Share Posted January 10, 2019 So since it was resurrected rather than welding in a high carbon bit would there be a drawback to making the entire head from 5160? Link to comment Share on other sites More sharing options...
Cavpilot2k Posted March 7, 2019 Share Posted March 7, 2019 On 1/10/2019 at 6:00 PM, Mike Thurston said: So since it was resurrected rather than welding in a high carbon bit would there be a drawback to making the entire head from 5160? It could definitely be done, but reasons not to include: 1: Not generally historically accurate to use high carbon for the whole head. 2: You'd need to temper the rest of the head pretty high to give it the toughness and shock resistance it should have. Not necessarily a reason not to do it, but it's just more work. Mild steel gives you that without doing anything to it. 3: 5160 is more challenging to weld to itself. Definitely doable, but not as easy to get good, solid welds as mild steel or mild to HC. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now