primtechsmith Posted February 16, 2013 Share Posted February 16, 2013 Other things have kept me out of the forge on a regular basis for about a year now...I wanted to get back into the groove on something other than a leaf. So, talking it over with the boss-man I came up with a ladle. I am about 9 years too late on making my first one, but I went ahead and did it. 3/8" square for the handle and a sheet metal disc(not sure of the thiickness). It turned out okay. Not quite what I had in mind with the handle, but it is good enough for an upcoming Iron-in-the-Hat...worth a ticket or two I hope. Peyton Quote Link to comment Share on other sites More sharing options...
Pug}{maN Posted February 16, 2013 Share Posted February 16, 2013 Should work as a ladle! Quote Link to comment Share on other sites More sharing options...
bigfootnampa Posted February 16, 2013 Share Posted February 16, 2013 I assume that you used mostly sinking technique on that? It looks quite nice to me! The handle is unusual but it looks comfortable! Quote Link to comment Share on other sites More sharing options...
primtechsmith Posted February 16, 2013 Author Share Posted February 16, 2013 Yep. The cup was made by sinking it into the swage block... Quote Link to comment Share on other sites More sharing options...
chichi Posted February 16, 2013 Share Posted February 16, 2013 Nice simple lines. Looks real good. Makes me hungry for some soup! Quote Link to comment Share on other sites More sharing options...
David Gaddis Posted February 18, 2013 Share Posted February 18, 2013 Nice and uniform. Is the handle gonna be strong enough? Ha HA Carry on Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.