Matthew Paul

Short Blade, WIP

Recommended Posts

I'm in the process of making a 13 1/2 bladed single edged short "sword" from 5160.

It started out as 1/4" x 1.5" x 17" flat stock. I forged the blade to shape and gave it an even distal taper. I left it a little thick so that it could be used to process wood if someone felt the desire. I have done no reasearch on traditional oe historical methods, and this is not intended to be a historical reproduction of any kind.



Here is a photograph of it just after the blade was forged. You can see that the tang has not been forged into shape yet.

IMG_2321copy.jpg





This is a photo after the tang was forged.

IMG_2347copy.jpg





This is the raw material which will become the guard and pommel (mild steel)

IMG_2348copy.jpg





Here is a shot of the sword and sketch of what the handle layout might be.

IMG_2350copy.jpg





And finally, the guard forged and fit.

IMG_2354copy.jpg





The guard was polished

574632_412138285524857_694764121_n.jpg





I roughed out the handle. It's maple burl, not sure if I'll go with this material or not.

IMG_2363copy.jpg





And I forged and fit the first piece of the pommel.

IMG_2367copy.jpg





I got the jelly bean forged. It's the counter weight/cap for the pommel.

IMG_2373copy.jpg


IMG_2371copy.jpg

IMG_2372copy.jpg

Share this post


Link to post
Share on other sites

I like what you have done so far,and it looks as if you are being very meticulous.Sorry I cannot give you any technical critique,but I'm just not qualified.Thanks for sharing and keep the photos coming.

Share this post


Link to post
Share on other sites

Looking pretty nice so far Matthew. One thing in particular strikes me though, the haft thins as it towards the butt and from my experience with handles that makes them harder to hold on to. For instance my hammer handles are wider at the end and require almost no grip to hold securely while straight or factory handles do require a secure grip and sometimes thought to hold onto in action.

Frosty The Lucky.

Share this post


Link to post
Share on other sites

well I finished it. I ended up not using the pommel hardware or the handle that I had set up above... No less, I'm happy with the end result - somehow it stayed and ended up straight after all the forging heat treating etc... The handle is Hickory. I probably wont be selling this one as it's a little rough, probably take it out in the woods and see how it chops cuts etc...

 


finished.jpg

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.