Jump to content
I Forge Iron

Recommended Posts

Hi folks, quick question about galvanised metal...

Would it be safe for me to set my brake drum forge into a sheet of galvanised metal so there's a surface around the brake drum for me to rest the butt of my work on? At the minute I have a few stacks of bricks around the drum but it's not ideal and it's still quite a balancing act. I've heard about the dangers of using galvanised metal but I constantly see metal garden bin incinerators that are galvanised, which makes me wonder if a sheet of galvanised metal would be safe for the job.

Obviously I won't do it if there's the slightest risk, but I can't help thinking that if there's not actually going to be any hot coals on the galvanised metal and they're contained within the brake drum, then surely the sheet wouldn't get as hot as a galvanised incinerator?!

Any words of wisdom?...

Link to post
Share on other sites

You will be fine leaving the metal galvanized. The fire in your forge is contained in the drum and the heat being radiated through the drum is nowhere near enough to melt the galvanize coating. You could look up the melting point of galvanize and if you will have enough heat to melt it then be cautious.

Link to post
Share on other sites

It's actually not the melting point (around 500 F), but the boiling point (around 900F) where fumes form, here's a good article. :

http://www.theodoregray.com/periodictable/ZincSafety.html

Note that simple brazing creates fumes. I braze dril-tec with its brass matrix onto horseshoes in the forge and get the white zinc oxide coating the front of the forge. Beats useing a torch where I'm directly over the brazing.

Link to post
Share on other sites

I would stay away from anyhting coated with zinc. You may not be welding on it now but in the future, down the road when it is covered with coal dust and dirt, you may forget and try to srike an arc. Zinc fumes are bad stuff iformation below taken from an MSDS for Zinc:

"Inhalation: Inhalation of zinc dust or fumes may cause respiratory tract and mucous membrane irritation with cough and chest
pain. It can also cause "metal fume fever", a flu-like condition characterized appearance of chills, headached fever, maliase,
fatigue, sweating, extreme thirst, aches in the legs and chest, and difficulty in breathing. A sweet taste may also be be present
in metal fume fever, as well as a dry throat, aches, nausea, and vomiting, and pale grey cyanosis."

I realise blacksmithing may be "sweet" but this is not the way to taste it.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...