KST1-Derek Fultz Posted August 10, 2012 Share Posted August 10, 2012 Like most smiths on here, I am always on the lookout for a nice big postvise. I have a few of the average 4"-5" jaw ones around that I use all the time, but a monster vise has alluded me all together. Unfortunately, my luck continues. I haven't found a big one, but I might have found the smallest? -Derek Link to comment Share on other sites More sharing options...
Robert Yates Posted August 10, 2012 Share Posted August 10, 2012 way cool lil post vice . Sam Link to comment Share on other sites More sharing options...
ThomasPowers Posted August 10, 2012 Share Posted August 10, 2012 neat hand vise I may have to make one for myself! Link to comment Share on other sites More sharing options...
ciladog Posted August 10, 2012 Share Posted August 10, 2012 That is called a pin vise. Link to comment Share on other sites More sharing options...
KST1-Derek Fultz Posted August 10, 2012 Author Share Posted August 10, 2012 Yeah, it's a pin vise, but I thought it's similarity to a post vise was "striking" :rolleyes: The "post" (handle actually) has a whole bored through it (bolt too) so that a rod, wire, or "pin" of any length can be passed through. -Derek Link to comment Share on other sites More sharing options...
Finnr Posted August 13, 2012 Share Posted August 13, 2012 Down right NEAT! Link to comment Share on other sites More sharing options...
Hillbillysmith Posted August 13, 2012 Share Posted August 13, 2012 I have to have one.... :) -Hillbilly Link to comment Share on other sites More sharing options...
Bob S Posted August 13, 2012 Share Posted August 13, 2012 I have to have one.... :) -Hillbilly http://www.amazon.com/Hand-Jewelers-Metalsmith-Hobbyist-Clamp/dp/B000RB78XY/ref=sr_1_3?ie=UTF8&qid=1344880008&sr=8-3&keywords=hand+vise Link to comment Share on other sites More sharing options...
Hillbillysmith Posted August 13, 2012 Share Posted August 13, 2012 Where's the "post" on that vise Bob S? -Hillbilly Link to comment Share on other sites More sharing options...
Bob S Posted August 13, 2012 Share Posted August 13, 2012 some guys want everything... :D Link to comment Share on other sites More sharing options...
ThomasPowers Posted August 13, 2012 Share Posted August 13, 2012 I actually have a small bench vise made like a postvise save that the "post" is truncated and bent in to provide a place for the bolt to tighten against the bottom of the bench. It's only about 4" tall in total. I mounted it on my travel forge for a while till I got a better method of bringing a post vise with 4" jaws! Link to comment Share on other sites More sharing options...
Harri Posted August 14, 2012 Share Posted August 14, 2012 This is a small vise B) And a blurry pic Link to comment Share on other sites More sharing options...
ThomasPowers Posted August 14, 2012 Share Posted August 14, 2012 Yup that's what mine looks like. Link to comment Share on other sites More sharing options...
wolfshieldrx Posted August 17, 2012 Share Posted August 17, 2012 This is a small vise B) And a blurry pic I've got a similar one too. A friend of mine says its a "gunsmith's" vise.. Link to comment Share on other sites More sharing options...
Frank Turley Posted August 17, 2012 Share Posted August 17, 2012 On this one, I had to make the spring, fine-tune the nut & screw, and put on the thick, lower washer. It is a beautiful forging, probably English. Link to comment Share on other sites More sharing options...
Bob S Posted August 17, 2012 Share Posted August 17, 2012 On this one, I had to make the spring, fine-tune the nut & screw, and put on the thick, lower washer. It is a beautiful forging, probably English. sweet little vice. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now