Sign in to follow this  
Chris P

Anyone ever heard of "Jett Press"

Recommended Posts

I bought a decent hydraulic press yesterday and I'm trying to find a little information on it. The only identifying marks I've found on the press itself is a tag that says "Jett Press." The lettering is kind of pealing off and there may have been more, nothing I can see.

If anyone has any info on this press or what it might have been used for that would be really helpful. It may be modified to fit my needs, but I'm always curious about machines and their history.

Some interesting things of note:

The press has removable heating rods in the pressing platforms, I assume to keep them from acting as a heat sink. It also has two control panels one with a timer for 0-60 seconds (probably for the cycling controlled by the switch below). The switch is labeled "clamp cycle" "manual" and "transfer cycle." I'm not sure what this means exactly. Any light anyone could shed on this would be great...

Thanks a lot for any help. FWIW, I can't find any info on "jett press" on Google...

Here are some pics stolen from the CL ad:

post-2705-0-30502300-1338433793_thumb.jp

post-2705-0-82735000-1338433800_thumb.jp

post-2705-0-19458500-1338433818_thumb.jp

post-2705-0-19207100-1338433827_thumb.jp

Share this post


Link to post
Share on other sites

I think it is a heated platen press. A place I used to work at had one similar, and like you just wanted it for the press and I can't remember the original application. Maybe some kind of plastic mold curing but the memory is very fuzzy.
Great score by the way.

Share this post


Link to post
Share on other sites

I would think the ''manual'' setting is for free form use, the others??? If you can find out the gpm and mtr hp. that would be handy. If those are small say 1gpm x 1 1/2hp you're looking at replacing the mtr and pump for forging use cause otherwise it will be a very slow press.....I looks like the cyl can handle the needed psi from the gauge.

Share this post


Link to post
Share on other sites

I'll have to look into the gpm. The motor is 1 1/2hp... It has two pumps, but I think its one pump for each cylinder. I'll take a closer look to see if it says the gpm.

Thanks for your help everyone. I'm researching heated platen molding presses now ;). I hope I don't have to revamp it too much, but if nothing else it should be a good base to work from.

Share this post


Link to post
Share on other sites

The machine may be set up to allow for closed die forming, of whatever material, then there would be a need for ejector pins, to push the part out of the die cavity.

I am sure you will find good use for that machine.

Phil

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this