Jump to content
I Forge Iron

My First Tongs


Recommended Posts

I've been messing around on the forge for a couple of weeks now, and I finally decided I needed some tongs to forge some bigger stuff. I've been reading a lot of books about bladesmithing, so believe it or not my first actual project was a knife. I've read all there is to read about it, but I figured to understand it properly I'd have to try it. I'll be posting that later. Anyway, I finally got some square stock to forge a pair of tongs which I'll need for working on some bigger stuff to forge cut-off hardys and things. Looking at most blacksmiths, they seem to have over 20 pairs of tongs for different sizes of metal. Not having the time to forge them, material to make them or even space to store them I got some inspiration from a photo on the forum for an adjustable tong. Here's how it turned out:

JrW6b.jpg

upvoV.jpg

I spent most of my time working on the rivets which were hard to get right so that everything was just tight enough.

DlkEk.jpg

It automatically adjusted to pick up real thin stuff like this blade.

oBbPf.jpg

And did the same for the biggest thing I could find, a 2" thick plate weighing just over 30lbs.

ty6ht.jpg

It's also pretty good at picking up round stuff, as long as the widest point is behind the pivot on the top jaw.

I'm quite proud of these for a beginner, and they should do just about everything I need them to do for a while!

Link to post
Share on other sites

I think I own something like 100 pair of usable tongs and have a bucket with probably 20 to 30 pairs of broken tongs waiting to be made into something useful. One of the reasons I have so many is that I have people at the shop andhaving only one pair of any given size is a problem.

Link to post
Share on other sites

Thanks! Thought they went pretty well for a starter project! They aren't too hard to build, and I imagine an experienced blacksmith could do it easily! I started with 12mm bar, made a normal tong jaw and flat on one length and made a right angle on the other for the pivot areas. The top jaw is two bits of flattened bar welded at a right angle (first try with a welder!) because I didn't have anything else to work with.

Link to post
Share on other sites
  • 3 weeks later...
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...