Jump to content
I Forge Iron

Touch mark experiment


Spears

Recommended Posts

I was playing around with ideas on how a touch mark could be made so I performed an experiment where I would heat up the punch-to-be material and pound it into a sheet metal cut out symbol.

I program a laser as one of my many day job duties so I cut a potential symbol out of .045” thick stainless steel 304. Aside from better material choices, 304 stainless is what I could get, so that is what I used.

I installed three roll pins in one of the plates so I could center the punch quickly over the symbol while red hot. A piece of 5/8” round 2.5” long W-1 tool steel was used for the trial.

With four quick blows from the power hammer the shape came out rather flat for a touch mark IMO but the detail was outstanding right down to the imperfections of the laser cut sheet metal.

With proper fixture setup, I think this process could probably be used to make some cool looking medallions or something. Enjoy, Spears.



post-9545-0-76645600-1335467307_thumb.jp post-9545-0-48975400-1335467320_thumb.jp post-9545-0-80717800-1335467329_thumb.jp post-9545-0-83569500-1335467343_thumb.jp

Link to comment
Share on other sites

That worked quite nicely, down to the bit of joggle in the lateral movement on the laser. Why didn't you just laser etch the punch?
I'm sure there's a good reason, I'm not a laser cutter guy but I'm thinking I'll know a bit more soon as you get back. <grin>

Frosty The Lucky.

Link to comment
Share on other sites

Just got back from Spruce Pine fire on the mountain blacksmithing festival in North Carolina. Very nice should anyone get the chance to go to that one.

Frosty I'm not sure if our dinosaur of a laser has cutting conditions to do more than "through" cutting. The operators 10+ yrs know nothing about etching and the manual doesn't talk about it either. I'll have to consult the service technician the next time he is in. I don't always get enough time to play around with the cool machinery.

I am going to try some designs in mild steel and see if I can do it over and over again and maybe make some key chains for sale or promotional give away. I'll post the results when I get there. Thank you for your comments. Spears.

Link to comment
Share on other sites

  • 6 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...