Trimmer Posted February 13, 2012 Share Posted February 13, 2012 The transmission on my lathe died today. Upon further investigation I found several gears with several teeth missing. Can anyone tell me where I can get a transmission? I am looking for a Drive All model 200. Any help would be appreciated. Thanks, Trimmer Link to comment Share on other sites More sharing options...
Hillbillysmith Posted March 23, 2014 Share Posted March 23, 2014 Look for replacement gears as it should be cheaper than buying a whole new transmission. Or, If you have a second lathe and a mill, cut new gears. -Hillbilly Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted March 23, 2014 Share Posted March 23, 2014 Check on the Practical Machinist forum, or Vintage Machinery forum for repair parts. Link to comment Share on other sites More sharing options...
HWooldridge Posted March 23, 2014 Share Posted March 23, 2014 That original post was over two years old. I hope he's got it fixed by now. Link to comment Share on other sites More sharing options...
arftist Posted March 25, 2014 Share Posted March 25, 2014 Too bad. I have a spare drive all in the cellar. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now