Jump to content
I Forge Iron

Recommended Posts

I have a gas forge I made from Kastolie 30 which is an insulating castable mortar. It has gotten cracked and chunks have fallen out. I would like to repair this instead of recasting. I see there are ITC products for repairing but it seems like it is more for resurfacing the interior of a forge and not for building up lost material i.e. 2" X 2" X 2" space. Does anyone have any experience with this.

Thanks,

Link to post
Share on other sites

I am new also and built my own forge from a freon tank. On my first use a long bar heating up slipped and hit the top breaking the ITC100 surface. I just mixed up more and filled it in. It worked. It is not cheap though. I got a bought a 1/2 gallon figuring I can make another when I'm ready so I had it available. Hope that helps.

RD

Link to post
Share on other sites

Even when taking care I seem to inflict damage to the refractory cement coating I use to seal and protect the ceramic wool. For periodic maintenance and repairing cracks or voids I use an inexpensive refractory cement like Meeco Mfg. Co., Inc. 611 Gallon Refractory Cement (3000 degrees) or Rutland 211 Dry Mix Refractory Cement 10 Pound (2500 degrees) and then coat the surface with ITC100. This has been the best and least expensive solution I've tried and works well. The ITC100 protects the cement from excessive heat and reflects the heat back into the interior of the forge - heats faster and hotter,

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...