pkrankow Posted August 22, 2011 Share Posted August 22, 2011 Found a well written introductory level FAQ on metallurgy that I thought I would link to. http://home.sprynet.com/~monel/metallurgy_faq_v11.htm Phil Quote Link to comment Share on other sites More sharing options...
Rangerdave Posted September 2, 2011 Share Posted September 2, 2011 Great post. I am new and this is just the kind of info I am looking for. This entire site is awesome. Thanks to all the individuals that spread the knowledge and experience they have. I made my first hawk last weekend and will share pics as soon as I figure out how. Quote Link to comment Share on other sites More sharing options...
Nakedanvil - Grant Sarver Posted September 3, 2011 Share Posted September 3, 2011 Lot of good information, but always question everything! Even me! Just skimming I see "1006 = junk steel stuff" and "1018 = Garden tools, re-bar, and tire irons". Most re-bar and tire irons are much better than this. Quote Link to comment Share on other sites More sharing options...
thingmaker3 Posted September 4, 2011 Share Posted September 4, 2011 Lot of good information, but always question everything! Even me! They said to me "Question authority!" I said in response "who are you to tell me what to do?" Read as much about metallurgy as you can. Compare. Contrast. Decide what writing makes sense and what is just babble. And most important of all: EXPERIMENT FOR YOURSELF!! :D Quote Link to comment Share on other sites More sharing options...
Kenny Fields Posted October 10, 2011 Share Posted October 10, 2011 Thanks for posting Phil. I found a lot of stuff that i did not know there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.