Serena Sadi Posted October 28, 2010 Share Posted October 28, 2010 Hi I'm Jenn thoe feel free to call me Serena. Yes I plan on changing the name. I'll answer either. I'm a artist who fell in love with wrought iron works in a college art history class. I want to start playing with hot metals and what to know some good basics. Like what I need to get started and what I need to know about the stuff I'll be making. I literaly know nota ATM but I'll be on reading and researching till my head spins, dips and swoops. So am taking in all free advise and would love to hear from anyone in the Amarillo, Texas area. Quote Link to comment Share on other sites More sharing options...
BIGGUNDOCTOR Posted October 28, 2010 Share Posted October 28, 2010 Welcome to IFI. Most of your questions can probably be answered by searching the forums, as lots of newbies have had the same questions. Quote Link to comment Share on other sites More sharing options...
monstermetal Posted October 28, 2010 Share Posted October 28, 2010 Hey Jenn... glad you found us... You'll find lots of good people and good info... Start asking questions and have fun! ;) Quote Link to comment Share on other sites More sharing options...
Robert Mayo Posted October 28, 2010 Share Posted October 28, 2010 Welcome Jenn you will find lots of answers to your questions here. Have fun! Bob Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 28, 2010 Share Posted October 28, 2010 I don't know if Texas has an ABANA affiliate near you; but I will mention that the NM ABANA affiliate will have it's yearly conference in Las Cruces NM in February---a bit of a drive but conferences are light on the ground over the winter months! Thomas President SouthWest Artist Blacksmith Association, the ABANA Affiliate for NM Quote Link to comment Share on other sites More sharing options...
phil shelton Posted October 28, 2010 Share Posted October 28, 2010 I am in the Amarillo area welcome to the forum their is a world of info here so just keep reading . the closest blacksmith group is in OK.( Saltfork Craftsmen )good group also in their are several Texas groups but a long drive from Amarillo Quote Link to comment Share on other sites More sharing options...
Thomas Dean Posted October 28, 2010 Share Posted October 28, 2010 Howdy from East TEXAS!! and welcome to IFI! The NTBA, North Texas BA is the closest Texas ABANA affiliate a mere 5hr drive. Saltfork has a Northwest group and SWABA in New Mexico. I am a member of all 3 of these groups and recommend them all. The closest Blacksmith schools to you would be Frank Turley's in Santa Fe, NM and the Gunter's school near Alburqurque, NM. Read all you want here but the best way to learn is to have some Hands on fire time. Again, welcome and enjoy the site. Quote Link to comment Share on other sites More sharing options...
its512eric Posted October 28, 2010 Share Posted October 28, 2010 Jenn, Glad you joined. Most important is to get something to heat your metal, something to hit it with and something to hit it on. As a reletivly new smith, I found a book: "The Complete Modern Blacksmith" by Weygers - The Best $20 I sent. Be sure to get the modern reprint with all three titles enclosed; Available on Amozon, and Barns and Nobles, ect. The book also gives you ideas about alternative anvils and forges, something that may help you along in the begining. Tools are harder to find, there are a few sites: Blacksmith Depot, Centar Forge and others but it aint cheep. Luckily they do hold most of their value. Ebay has many, many items too - tread carfully. Personnally I have seen some good and some realy bad come from the various sellers. I suggest, once you have one of all the bacis - make your own tools. It is rewarding to know that your work is feeding your creativity. Don't forget your touchmark. I know that there are ABA groups for North Texas and for Oklahoma. Smithing is like a rock rolling down hill - you start slowly and build exponentionally. See you around, Eric from Pflugerville Texas Quote Link to comment Share on other sites More sharing options...
thecelticforge Posted October 28, 2010 Share Posted October 28, 2010 You have my attention. I almost wish I still lived out there. Anyhow, welcome to our home away from home and don't let Thomas bug you too much. Quote Link to comment Share on other sites More sharing options...
Thomas Dean Posted October 29, 2010 Share Posted October 29, 2010 You have my attention. I almost wish I still lived out there. Anyhow, welcome to our home away from home and don't let Thomas bug you too much. He's talking about Thomas POWERS!! not me Make a few of the meetings either in Oklahoma or NM, mainly because they are closer to you. You can get some hands on help at these meetings and can usually find someone that has an extra toy, er I mean TOOL, they are willing to sell. www.saltforkcraftsmen.org is the Oklahoma site and you can check the schedule for a meeting to suit your schedule. http://www.swaba-abana-chapter.org/ is the site for SWABA, New Mexico's site and you can check their schedule there also. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted October 29, 2010 Share Posted October 29, 2010 Hey! I resemble that remark! I have a friend in Dalhart TX who forges knives that you might talk to. Goes by Sandpile over at farwestforge.com I've heard lots of good things about the Salt Fork group! Quote Link to comment Share on other sites More sharing options...
jimmy seale Posted October 29, 2010 Share Posted October 29, 2010 howdy from west texas,jimmy Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.