Rich Hale Posted March 23, 2010 Share Posted March 23, 2010 This trailing point knife is about a foot long and the blade is a quarter inch thick 440 C stainless. Heat and cryogenically treated. The scales are mammoth bone. The Bull on the face side is protecting his female partner on the other. A full side view of a female elephant. This past weekend the knife was entered in the knifemaking competition at the Knife Expo 2010 show in Pasadena Cal and was awarded the trophy for the best engraved knife. All work on this knife done by me. Thanks for looking, Rich Hale Link to comment Share on other sites More sharing options...
brucegodlesky Posted March 23, 2010 Share Posted March 23, 2010 Beautiful piece of work Rich!! Link to comment Share on other sites More sharing options...
Ronnie Posted March 23, 2010 Share Posted March 23, 2010 Rich you do some amazing work. Thanks for the share Link to comment Share on other sites More sharing options...
beth Posted March 23, 2010 Share Posted March 23, 2010 thats fantastic !! so cool. thanks for sharing from me too. :) Link to comment Share on other sites More sharing options...
markb Posted March 24, 2010 Share Posted March 24, 2010 Rich Congratulations on the award, well deserved. Your engraving looks like it could be considered carving. I guess engraving is carving, but looks like you went beyond. Are you using a scope, optivisor or? Gravers and hammer or machine? Allways enjoy seeing your work Mark Post some more pics if possable. Link to comment Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now