dickb Posted September 15, 2009 Share Posted September 15, 2009 Dimensions 23 1/2" long 4" wide by 9" high. The prichet is about 5/8 and the hardy is about 7/8 inches. Hour glass base with a square hole punched in the center. There is an extra hole in the foot under the horn end. I put a piece of paper in it to make it show better in the pics. Can anyone give me an idea about the age of this anvil. I've been told it's a Peter Wright . There is a small step in the foot at foot under the horn and under the tail end. The numbers 1 0 5 are heavily stamped into the side. Some lettering is punched in a circle. I can make out OLT near the top or the circle and possible HT near the bottom of the circle. The lettering isn't too sharp and I may be wrong on it. No cracks, not sure what it's made of but there is a little swayback near the horn and a little mushrooming there also. Can anyone identify the anvil, and did I pay, more or less, a fair price? See pictures at Pictures by dickb_2009 - Photobucket Quote Link to comment Share on other sites More sharing options...
orgtwister Posted September 15, 2009 Share Posted September 15, 2009 my peter wright don't have any circle on it and the horn is different i'm thinking its some thing else but than again i'm not an expert or even close to one as for what you paid you didn't say what you paid but in my opion i'm cheap and will waint for the deal i like i refuse to pay more than 150 but than again i live in jersey (and your not that far either)were there were anvil manufacturing in the tri state area so i have seen alot of anvils for sale the thing is do you feel you got a good deal Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted September 15, 2009 Share Posted September 15, 2009 Depending on the time it was made PWs can have "Solid Wrought" in a circle on them. The flat along the front and back feet is a pretty good indicator of a PW too. Orgtwister; have you read "Anvils in America"? One of the ways you can date some anvils is by the variations in what's stamped in them. Quote Link to comment Share on other sites More sharing options...
Pac Posted September 15, 2009 Share Posted September 15, 2009 Didn't see a picture of the markings in your album. Does it look something like this? Quote Link to comment Share on other sites More sharing options...
Drewbacca Posted September 17, 2009 Share Posted September 17, 2009 That sounds almost exactly like the one i picked up recently... mine is about 170lbs... I think the numbers are the old british stone weight system. I also cant make out the lettering in the circle. Quote Link to comment Share on other sites More sharing options...
ThomasPowers Posted September 17, 2009 Share Posted September 17, 2009 PW's are weight stamped in CWT all right. Quote Link to comment Share on other sites More sharing options...
BlackSmithBear Posted September 18, 2009 Share Posted September 18, 2009 I found a website that will convert cwt-qtr-lb into US or metric weight... " Hundredweights, Quarters and Pounds Calculator ". It's much easier than remembering the values and trying to do it in your head... Bear Quote Link to comment Share on other sites More sharing options...
a.Deeley Posted October 9, 2009 Share Posted October 9, 2009 can someone explain to help me how to upload photos of ow to identify an old anvil found in our family shed?..thanks A.D...have tried to post some photos but dont know if it worked. Quote Link to comment Share on other sites More sharing options...
irontwister Posted October 19, 2009 Share Posted October 19, 2009 hey im just a noob, but it realy sounds like a hay-buddenn anviljust found out i have one, but i cant get pictures on it but ill try again tonight.the hay's have letters on the side with the horn on the right. Quote Link to comment Share on other sites More sharing options...
Dragons lair Posted October 19, 2009 Share Posted October 19, 2009 Irontwister, Hay Buddens don't have flats on the feet. Does yours have a serial number on the left of the front foot? Ken Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.