Jump to content
I Forge Iron

Recommended Posts

It would be interesting to see what the same 5 and 10 hit results are for the use of one's normal hand hammer?

I doub't any of us could reduce a 1" bar to 0.3" in 5 blows, but I reckon lots could do the 0.9


Decided to take Dave up on his challenge. Hope others follow suit and submit their results.

Used 1 inch a36

First test was with my normal forging hammer a Clark/Hofi hammer 2 lb 12 oz

Face is only1 3.4 inches square with rounded edges resulting in only 1 1/2 inches of contact.

Next I used a 8 lb sledge first as a hand hammer and then striking while Tom Anderson held the bar for me. I have video clips that I'll post later.

Using a Hand Hammer and Sledge results in the "squished" area not being of uniform thickness. The forged area is a plane that slopes in 2 direction. What I decided to do it take four measurements ( Front and Back left and right of the 2 inch section) and then average them. This gives the equivalent thickness (thinness?) of the forged area.

Here are the results:
2 lb Clark/Hofi 5 hits - .906 10 hits - .781

8 lb Sledge (One Hand) 5 hits - .756 10 hits - .687

8 lb Sledge (Striking) 5 hits - .687 10 hits - .594


The four measurement for each bar were measured using a ruler and were to the nearest 1/8 inch (rounded up)

Pictures show the bars left to right 2lb12oz 5 then 10 (actually 11 hits*), 8 lb sledge one hand 5 then 10 hits and finally 8 lb sledge striking 5 then 10 hits

Here are the 4 measurements

2lb 5 - 1, 1, 3/4, 7/8 10 - 7/8. 3/4, 3/4. 3/4

8lb hand 5 - 3/4, 3/4, 3/4, 3/4 10 - 3/4. 5/8, 3/4. 5/8

8lb strike 5 - 3/4, 3/4, 5/8, 5/8 10 - 3/4, 5/8, 5/8, 3/8

Bill

* Seems my biological hammer has some control issues and it hit 11 times not 10 as you'll see in the video

15010.attach

15011.attach

Link to post
Share on other sites

Brilliant, thanks for taking the challenge! :D

I will have to try and aquire some 1" bar to do the test myself!

Just checking, A36 is just plain mild steel? I generally only work with tool/spring steels, so when I buy mild I phone up and ask for the 'general cheapy mild steel please' as I don't use much of it (the last 500kg lasted me three years!). I'll get a few inches from a smith nearby ;) I'm certainly not doing the test with a bit of 1" tool steel, it would make me look REALLY puny!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...