Max Mulholland - Tetnum Posted March 26, 2009 Share Posted March 26, 2009 i have a hand pump rivet forge and it really needs a hood because it is the most smoky forge i have used so are there any plans on the web for a hood Quote Link to comment Share on other sites More sharing options...
blksmth Posted March 31, 2009 Share Posted March 31, 2009 tetnum, I believe Centaur Forge sells a good for rivet forges or similar. At least you can see what one looks like. Quote Link to comment Share on other sites More sharing options...
Frosty Posted March 31, 2009 Share Posted March 31, 2009 You can take a look at pictures from catalogues, patent searches, etc. till you find one you like. Then build a mock up from poster board. When you get it the way you like it, take it apart and use it for a pattern to make one from sheet steel. Use something thin like 18ga. it only has to deflect smoke, no need to make it heavy. Frosty Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.