Search the Community

Showing results for tags 't burner'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • I Forge Iron Forum
    • Keeping You Informed
    • Feedback and Support
  • Blacksmithing
    • Blacksmithing, General Discussion
    • Anvils, Swage Blocks, and Mandrels
    • Stands for Anvils, Swage Blocks, etc
    • Forges
    • Blacksmith Tooling
    • Vises
    • Heat Treating, general discussion
    • Building, Designing a Shop
    • Problem Solving
    • Alchemy and Formulas
    • Fluxes used in blacksmithing
    • Finishes for Metal
    • Metallurgy
    • Metal Sculpture & Carvings
    • Cold Worked Iron and Steel
    • The Business Side of Blacksmithing
    • Smelting, Melting, Foundry, and Casting
    • Member Projects
  • Machinery and power tools
    • Machinery General Discussions
    • Power Hammers, Treadle Hammers, Olivers
    • Presses
    • Grinders, Sanders, etc
    • Drills, Post drills, Mag drills, etc
    • Lathes
    • MIlls, Milling machines, etc
    • Saws, bandsaws, hack saws, etc
    • Shears
  • Bladesmithing
    • Knife Making
    • Knife making Class General Class Discussion
    • Knife Making Classes
    • Axes, Hatchets, Hawks, Choppers, etc
    • Chisels, Gouges, Scissors, etc
    • Finish and Polish for Knives
    • Folding Knives
    • Heat Treating Knives, Blades etc
    • Historical Blades
    • Spears, Arrows, Pole arms, Mace/hammer etc.
    • Swordsmithing
  • Non-ferrous metal working
    • General Metal Specific Discussion
    • Aluminum Alloys
    • Copper Alloys
    • Mokume Gane
    • Non-ferrous metal - heat treating
    • Repousse
    • Titanium Alloys
  • Welding / Fabrication
    • Welding/Fab General Discussion
    • Welder's beginers course
    • Welding Equipment
  • Misc Discussions
    • Introduce Yourself
    • Everything Else
    • Events, Hammer ins, Where to meet
    • Book Reviews
    • Tuesday night blueprints
    • Vulcan's Grill, food recipes
    • Farriers and Horse stuff
    • Shop Tips n' Tricks
    • Gunsmithing, Muskets, Flintlocks etc
  • Store
  • Safety
  • Sections
  • Blacksmith Groups Forum

Categories

  • Pages
  • Articles
  • Blueprints
    • 00 series
    • Original Series
    • 100 Series
    • Uri Hofi Series
  • Lessons in Blacksmithing
  • Miscellaneous
  • Stories
  • The Smithy
  • You Might Be A
    • You might be a Coppersmith if
    • You might be a Tinsmith if
    • You might be a Machinist if
    • You might be a Knifemaker if
    • You might be a farrier if
  • Vulcan's Grill

Categories

  • Books
    • Introductory
  • Newsletters
    • AABA Anvil's Horn
    • New England Blacksmiths Newsletter
  • Trade Journals
    • American Blacksmith and Motor Shop

Calendars

  • Community Calendar

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests


Location


Biography


Interests


Occupation

Found 3 results

  1. My take on a Frosty T burner. I've been reading everything I can on this forum but its my first time building a forge so please bring me up to speed if I'm off on something. I've built a T burner following Frosty's method, had to make some minor changes on how the mig tip is mounted due to lack of available hardware in my area. The problem I'm running into is when I use a thread protector on the end of my burner as frosty suggests I cant keep the thing burning (not slowing down the gas enough?) but when I put on a bell reducer it works without a hitch. This brings me to my question of what to do with the flare end inside of the actual forge? Will the issues I'm having with the thread protector be negated by having the burner in the actual forge environment/making a bell from the ceramic wool/kast-o-lite or should I increase the size of the hole in my forge wall to accommodate the larger bell reducer that I know will produce a good flame? Any insight into the area where the burners enter the forge would be greatly appreciated. I'm hoping to get a solid plan together before I start putting in my wool/refractory materials. 0.035 mig tip, 6" pipe nipple, 1x3/4 T joint, 3/4"x1 1/4 bell reducer
  2. I am looking at building a propane forge setup and after a lot of reading I decided to Use a T Burner. The burner may not be the best place to start but I had most of the parts already. One thing I couldn't find was the tap for the mig tip so I came up with something a little different. Parts used 3/4 run X 1/2 chase Tee 4in nipple .024 mig tip 1/4 X 1/4 compression fitting I realized that the mig tip fit right into the compression fitting So I put it in and tightened it to compress the ring then disassembled it leaving the compression ring on the mig tip I drilled a hole the same size as the O.D. of the compression fitting in the Tee, thank you Frosty for the different ways to drill a tee straight. I put the fitting in from the outside and went crazy trying to thread the compression nut back in the inside. I did have to cut the compression nut back a little and crown it so it would fit tight and keep the whole thing straight. I marked the mig tip so it was about in the middle, disassembled, cut the tip and reassembled. My next step is getting a regulator and associated hoses and valves, is a 3-30 psi regulator good for this setup. I found a place that has a complete setup with regulators for about $70 So here's the question, did I set myself up for failure or disaster in any way or should this work? Bob
  3. Purpose of New Thread: Documenting my failures and successess while attempting to build my first propane forge. Very detailed for anyone who is super new like me. There is no reason to read or follow this thread any further if you are an expert at building forges and blacksmithing. This thread should be beneficial for those who have very minimal skill and knowledge related to blacksmithing, like me, but are now falling in love with the craft. When I say minimal, I mean limited tools, limited knowledge of how to use certain tools, and your wife will not allow you to even unclog the toilet BC she fears what may follow! If that describes you, then you and I can relate with one another. After spending several days reading through multiple threads on this site, I learned a few things. First, there are a TON of EGOs in the blacksmithing community. Do not let the keyboard warriors scare you from the valubale resources this site has to offer. Two, do not expect someone to be nice to you because you just now learned about blacksmithing and want to build katana swords BC you binge watched 3 seasons of Forged in Fire. Three, don't ask questions unless you have researched the problem thoroughly and are still lost. You will get an answer, but it probably won't be what you were expecting. (If someone retorts what I write about that, then go read a few threads because you obviously haven't read any.) Four, spend time putting your bio together so people know where you are from. I've already had some local reach out to me and I'm looking forward to working together with him some day. Again, I'm still learning all the "unwritten rules" as I go along, but I learned most of them by reading through several threads. I would recommend you do the same. Soooooo, let me begin by saying I love watching Forged in Fire. I've read a few posts in here and we may be in the minority by admitting we like the show. Because of some of the comments I've read, I have embraced the idea of being called a "Forged in Fire" TV smith. If we survive not blowing everyone up, we may one day pound some metal into an object! However, my son and I love the show and are eager to learn more. So that's how I ended up here. Along with this site, I watch a ton of YouTube videos for building forges and blacksmithing. Some are better than others, but I learned more by reading the Forge 101 posts here. Which brings me to the forge build... Before I learned about this site I started building a forge out of a propane tank. (See pic) Be super careful cutting these bad boys up. Again, we are not expected to survive long, so don't give us TV Smith's a bad name. Just make sure to bleed the propane out of the bottle, clean it, and "air it out" for a few days before hacking away. I cut away both ends of the tank and was left with 12 inches in total length . I used a handsaw BC I didn't want to risk the sparks and propane having a party together in my garage. I then researched forge liners on google and found kawool was an option. I bought some on amazon and thought this was super easy. I then quickly found out you need to wear a good mask while working with this stuff. No, the little white mask that old people wear will not work. Drop the coin on a nice mask because you will use it A LOT! Do not go cheap on this. Sell a kidney if you must, but save your lungs with a proper mask. Your kids will need one at all times too. The liner was actually really easy to put on. As you can see in the picture, I thought I had it all figured out....... then I stumbled onto this website and quickly realized I'm really unprepared to make a forge, let alone an efficient forge for my needs. So hopefully you learn from my mistakes and read through all of this before you start a build. Now I'm going to finish the build I started because I want to see this through. After reading a few posts, I learned that you need to do some math and learn how to measure in cubic inches. If you are like me, I have no clue what that is, but I dare not ask here, so I went back and asked my friend Google. I like Google because it doesn't judge my stupidly. Long story short, it's how big the inside of my forge is. The reason this is important is because there is a guy who goes by the name Frosty, who posts all kinds of information on this site. He even has a burner that he created and gives very detailed plans of it under the forge tab. (Forge > Frosty "T" Burner) He basically tells you how big the forge needs to be, in order for his burner to efficiently heat the forge. In my case, I need to make the measurements and find out because I don't know. Being stupid, I just rushed into building the burner because I assume it's a one size fits all kinda deal. Now I know the forge needs to be somewhere in the ranges of 300 - 350 cubic inches. If I'm saying that wrong, don't worry, I will be corrected within hours. Point being, check out the post related to the Frosty T Burner