Search the Community
Showing results for tags 'instruction'.
Found 2 results
Hey fellows, after I published my guide on how to forge a rams head wall hook some people asked me how to make the punch for the eyes of the rams head. Due to the fact that there isn´t any video covering this very type of punch yet, I decided to make one on my own. I hope it can give you an idea how you would forge one on yourself. Please bare with me, it was -10°C and gloves where an absolute necessity in order to be able to forge anyway. http://www.youtube.com/watch?v=NCkMiVZR8Pw&feature=youtu.be Here a little written description: 1st heat: forge a square taper 2nd heat: dress up the taper 3rd heat: dress up the tip of the punch 4th heat: punch a dent into the tip of the punch using a ball punch 5th heat: take off two opposing corners of the tip, if you want the eye ball to be round, only use a file, if you want it elliptical first upset it horizontally with the hammer and then dress it up with a file 6th heat: cut it off at desired length 7th heat: make the strike end of the punch octagonal and forge a teardrop shape about 1" below the striking face, dress the striking face 8th heat: anneal the whole punch 9th heat: harden the tip of the punch at cherry red color and then use the spare heat to temper it to sky blue color last step: test if it is shatterproof and test the punch on a piece of steel. I hope you enjoyed the video and learned something new! Your - Daniel