Search the Community
Showing results for tags 'brake disk'.
Hello IFI, I've been passing through this forum for quite some time and as I just fired my first home built forge I though it time to join. Here's the build out list: Brake Disc, 16x30 metal cart, Buffalo blower, 2 inch piping for tuyere, clay, fire brick, and regular brick. sheet metal. I clayed the entire cart around the disc under the bricks, this leveled things out for the brick mostly, but also added a nice added layer of thermal protection to the cheap cart metal. Fire brick is cut around the disc face, giving me a pot 3.5 inches deep and 7 inches wide. Picked up the blower for a steal on auction, ugly on the outside but beautiful on the inside, once I cleaned it out and re-lubed it turns like brand new. Currently I've got a 2x4 and metal straps holding it rigid with the piping but plan to swap that for some metal brackets in the future, it was just all I had laying around at the time. Lastly I added the simple metal surround for wind protection plus the added benefit of being able to pile extra fuel up that back wall in the corners. Fired for the first time Sunday with some nice lump charcoal, wally world was having a sale so why not... As it was over 100 degrees out I mostly just beat up some rebar I had laying around before shutting things down, test firing was a huge success. I noticed a few odd hot spots underneath the cart and decided to clay in the interior of the pot as well which I should have done it to begin with anyways, but that should take care of my errant heat. We'll see in a few days when I have time to light it up again. Outside of heating things up with a torch and beating them until they submit to my will around the homestead I've only ever worked steel on a lathe and that was a few (read 20) years ago. I've done some forging of specialty tools made out of soft metals like copper and bronze in the distant past as well but never what I would call blacksmithing of anything. I've been wanting to get into this side of things for quite awhile so I'm excited about this forge build and can't wait to see how ugly my first projects turn out. Ha ha. Attaching some pics for your pleasure or verbal destruction, whichever your bent.