Search the Community
Showing results for tags 'angle grinder'.
some time ago I made this support and I must say that I find it very convenient and useful. it is assembled and disassembled in few seconds and allows you to fix the grinder to the vice and work by holding the piece with two hands. so it is possible to be much more precise especially if you work on small pieces. you can mount all the discs and use the tool to grind, cut, wire-brush, smooth, sharpen, polish, sandpaper, remove rust, strip paint, etc. etc. in addition it allows to hold the grinder in the vice in many positions here you can find the video and inside there are all the details and mesurements if someone wants to build it: https://www.youtube.com/watch?v=uAuiQPC4EwY
Howdy, so I've got this anvil, and I'm not sure exactly what to do about the edges, if anything at all. I've got an angle grinder with an 80 grit flap disk and a 30 grit grinding disk. I wanted to find out what ya'll would do, before I roll up my sleeves and make a fool of my self. Thanks! -Noah