Search the Community
Showing results for tags 'Alec'.
Hey Fellows! Those of you who frequently read my posts, respectively watch my videos, might already know that I try to work with as many blacksmiths as possible. Especially those in my youngster age. And also that I always have my camera at hand to capture the best moments for me and those that are interested in it as well. So was it that I visited Alec in England over the Easter holly days. I´ve already worked with him two times before and he is not only a colleague, but also became a good friend of mine. We had four days to work, but unfortunately I´ve been sick in the beginning, so we weren´t be as productive as we could have been. Nevertheless we made a bunch of very cool tools both for me and Alec and also some nice artistic items. Furthermore it was a good preparation for he demo at the NWBA in a few months. This is all we´ve produced (On the huge sledge I´ve only made a new handle): This is what I´ve taken home with me: Our last project: A Brazeal style fullering hammer (not a rounding hammer) from 40mm square 1045 steel: One day I was so sick that I could not forge. So I decided to film Alec whilst forging and we made a real little image film for his work. I put all my expertise and efford in the filming and the edit and I really hope it paid for it! (For who is interested: Camera: Canon EOS 650D (Rebel T1i), Lens: EF 24-70mm f/2,8 L II USM) But see yourselves: Last year Alec was on tour with the YoungSmiths, which is an international group of - who guessed it - youngs blacksmiths that was founded by Brian Brazeal. They traveled around the USA and gave public demos. I am always impressed, what skills this young lad, who only reaches up to my chest and is with 15 still three years younger than me, already has. This year I am supposed to also take a course at Brian´s and join the YoungSmiths as well! So my visit at Alec´s place also was meant as a preparation for summer. We also filmed a tutorial about how to forge cranes: There are some more video that are not edited yet. If I decide to upload them I´ll post them here later. I hope you enjoyed my little diary! I am looking forward to a lot of very cool experiences and good crafsmanship with Alec, Brian and the YoungSmiths in summer. This was it from me so far! Yours - Daniel
Hey Folks, I´d like to ask for your advise on a project I want to start soon. My shop is half oudoors so I have a roof over the head but literally no walls. Until now I have always had my forge standing just free and hoped for good wind... But as you can imagine I take quite a lot smoke and dust and I mustn´t damage my body with stuff like that at my age. So I want to install a smoke hood over my forge. The only problem is that I only have a very limited budget of about 180$. So I guess I have to take a DIY-solution. After some research and discussions with some fellow blacksmiths I came to the conclution that this design (I know I ain´t very good at drawing...) would give me the biggest bang for my buck: This is my shop: And this is the design I´d like to try: The hood will be built from an old oil barrel, cut out on the front and bent upside to form a guiding-shield. On top of that the chimney will be installed reaching through the roof of my forge with min. 8" diameter. Would you also advise me to do it like that or do you have a solution (any construction plans) that might be more (cost)effective? I´d be very happy about any advise you give me! - Daniel