Jump to content
I Forge Iron

MMChiefSS

Members
  • Posts

    4
  • Joined

  • Last visited

Recent Profile Visitors

51 profile views
  1. The step down from the face to the small table by the horn is about 1/4 inch. Not sure what that means for this anvil.
  2. Thanks very much for your quick and knowledgeable replies. A 300# anvil is probably too big for me but I'll go look and use the knowledge I learned here to evaluate it. FYI I'm in SE Georgia and the anvil is in NE Florida. Thanks again for your help. God Bless you all!
  3. I've found a Vulcan Anvil that appears to be cast from the owner's description; he said that some of the logo is badly pitted. It has a raised number "30" under the horn (pointed end) and a raised number "44" under the other end. The owner thinks it is about 250 pounds and is unable to send pictures. The face has had some things welded to it and then cut off with a cutting wheel so I don't know its actual condition. The owner thinks the face is about 1-1/4" thick because of a weld he can see on both sides. it is mounted on an angle iron frame with channel Iron feet that is less than 4 years old. I'd like to know what the markings mean and how much it may be worth. It is local (within 50 miles). I just need some idea before I make an offer. He hasn't set a price. Thanks for your wonderful forum. God Bless!
×
×
  • Create New...