Jump to content
I Forge Iron

Paul TIKI

Members
  • Posts

    445
  • Joined

  • Last visited

Everything posted by Paul TIKI

  1. Dad didn't talk too much about his time over there. Most of what he did discuss was his time spent basically on a base and in a bunker. I gather that he told my older brother more than he told me. I was a baby and my brother is 12 years my senior, so he would have been at that age to ask questions. I understand that he told my brother something that highlighted some of the dangers and mom overheard. She was evidently kind of ticked that he hadn't told her
  2. George I know I'm a bit late to this chunk of the thread, but you reminded me of something about my dad. He served over there. Two tours with about a year in between. If I recall correctly he got back to the states in Mid to late 1970 so you might not have crossed paths. He was in Intelligence, I don't know exactly what unit, but I wish I did. I think he was a Captain at the time. When he got back he made Major, Was stationed in DC for a few years, and went to CGSC and then Fort Devens, but then he retired. Thank you for your service sir
  3. Hey Tap Tap Bang! And Welcome. One thing I learned is that you can set up a very simple and small forge setup that can actually travel. Look up the JABOD forge. JABOD stands for Just A Box Of Dirt. Then look up Improvised Anvils. You can pack up a shop in to a relatively small space, It's how I got started. Anyway, I built a roughly 1/2 by 1 meter by 10 centimeter wooden box. I took a couple of empty 20 kilogram cat litter buckets with lids that I filled with Sand and some bricks. I still use a chunk of scrap steel as an anvil. You can use a chunk of steel pipe with a hair dryer taped to the end for the air supply and lump charcoal as fuel. Anyway, you can pack it all up into a surprisingly small footprint, which is what I did to store it in the shed over the winter the first year I decided to start. Oh, and the whole thing didn't cost much money wise. I later upgraded to an inexpensive propane forge, which takes up even less space/mass. for stock to make some very basic things I have used cast off chunks of rebar from construction sites, I have talked to a couple of Auto mechanics to see if they would let me raid their scrap bins, and I have spent about 20 dollars(US) on some landscaping spikes that are really just 25 cm long nails. Railroad spikes are also some good stock to work with if you can get them legally (not difficult but take care, at least in the US) All of that is fairly small, space wise. It might be small enough to pack in a caravan, depending on how big the caravan is. your campsites might have rules that don't let you set up and actually forge, but maybe not. Just be aware of potential fire conditions. If nothing else, you can pretty cheaply get what you need to get started, even while travelling and then set up later at home. Anyway, on this site you will find instructions on the JABOD forge, Improvised Anvils, and such. I believe you can also find some stuff on viking traveling forges elsewhere on the internet, which might give you other ideas. My biggest regret is that I didn't start doing this way sooner, especially once I found how cheap and relatively easy it is to get started. I still have a very long way to go, but....I get better every day I go out and do it. Don't wait like I did to find the perfect place or set up.
  4. some good news, although without pics today. Artie has integrated very well into the fur family. He just won't hold still for pics
  5. Thanks Frosty! I hadn't thought of that but theres a couple of those stores I visit from time to time
  6. I do have a project in mind. I'm going to make a bunch of simple leaf handled hoof picks for the guys out where my autisitic son goes for horse rides every week. I need to do some more checking but it's a simple tool that most everyone who lives around horses keeps with them (according to the ultimate trustworthy source, the internet). I'm not super familiar with that side of things. I have debated on whether I should talk to them about getting some old spent horseshoes to use as stock. Or who knows? Anyone here lives around a lot of horses know of a simple tool a novice could make that would be useful to someone who spends a lot of time in the saddle and also runs a horse boarding outfit?
  7. So HR issues were solved, finally. Still dont remember about half of December and most of January. Feeling a bit better, memory is improving, I hope. Back to work close to full 40 hours a week. I've lost a great deal of weight. Swinging a hammer is diffucult right now so nothing happening at the froge for the moment. Needs to warm up a touch first.
  8. cautiously optimistic. there are a few more scans at various time intervals, but this is good
  9. That is the best way I have ever heard that put and I will be stealing it!
  10. kind of back at a low point again. issues with work and hr and paperwork and time off. And still feeling like dookie. I feel like I have lost most of January. It's not all negative. Last CT scan doesn't show anything so cancer appears to be gone Catbert, the evil HR director is real!
  11. Well there is still a bit of bruising, and I lost a day or two, but I want to say thanks to everyone for the prayers and healing light. I'm taking in more calories now, but that's the purpose of the darn tube to begin with. I had an acceptable Christmas, minus the traditional insane amount of food. Didn't think I would miss that, but I did. Mom was a great cook, and food meant family in a real way. This year instead it was helping assemble toys for the grandkids. Same quality of memories, but less potential need for TUMS. I seem to have lost a day this weekend. I guess my meds are better than I thought. I would have liked to enjoy more food to balance the mandatory battery slinging and screwdriver weilding. Oh well. I got to see the grandkids and that was the important thing. Inlaws a stuff too, but grandkids.... priceless
  12. Modern medicine can be wonderful, can't it. In the scope of history, what I'm going through might likely kill me just a blip of time ago. Your cataract might have left you blind. But now, you can see, probably better than you have in years, and I get to gripe about treatment types
  13. Goodness, who would have thunk a punch through the solar plexus would be this painful. I hope this heals fast with increased ability to take in nutrients. Please pardon my brief foray into self pity. And thank you all for the prayers and positive vibes. I am so very grateful. May the light of the Lord shine on you all!
  14. No, strictly a four barrel for me. Procedure was today and it hurts like the Dickens. We shall see what tomorrow brings. The procedure itself was check in at eleven, get the happy drugs by noon, kicked out the door by 2. Talk about tight turnaround
  15. Small to medium setback. Not recovering like I should. Not getting calories and nutrients like I should because radiation nuked my mouth and gullet pretty good. Anyway I am getting a feeding tube placed in my abdomen/stomach tomorrow and could use a few rings on the anvil and maybe a few prayers. The procedure is really relatively minor, and is supposed to take all of ten minutes once you are under. But hey, if there's an angel or two looking for me I won't complain. I just hope this will help speed the overall healing process and get me back out to forge by springtime. I need to say it, Thank You All, and God bless you all!
  16. Thank you all for the Prayers and good vibes. I finished radiation and this Thursday I finished with chemo. Now we wait a few weeks for the scans to be sure, but Doc. is optimistic! I need to regain my strength and re-learn to eat and swallow better. I only have taste buds for salt and bitter right now, but the rest should come back. I can't remember if the mods will allow this you tube link, but It's me ringing the bell at the oncology dept. Thursday. I'll take it down if it breaks a rule. just wanted to share https://youtube.com/shorts/sZTcvllqYHM
  17. Blue Rooster, you just gave me a heck of an idea. There is a Habitat for Humanity Re-Store, nearby that sells old used kitchen cabinets. Pick one the right size, put casters on the bottom, and a hunk of plywood on the back and top... Make a toolbox dirt cheap. Matter of fact, I have a few spare cabinets that are gonna end up thar way when I get my strength back
  18. Just a quick update. I am finished with the radiation treatments, but I still have some Chemo to go. I'm pretty darn weak and have lost a ton of weight (A little over 100 lbs), but I was 280 at one point so I could afford it. Can't eat, hard time drinking. So I am having a rough time of it. Further prayers and positive vibes and ringing of the anvil would be greatly appreciated.
  19. I used to work at a plant that produced Air Conditioner units. We used oxypropane torches to seal all the copper joints and the test was to over pressure the unit before charging it with high pressure air. Any leaks would reveal themselves. I got to the point where I could do about 15 units an hour for everything but the coil itself. That was for the very best guys because you had to be fast and have a light louch. We used special torches that had a y head bent back on itself to heat both sides of the tubing simultaneously. Long sticks of silver based solder was what we used to join them. If you weren't careful you could melt right through the wall of the copper tubing in a flash.
  20. OxyPropane is good for high pressure copper applications though
  21. I wonder at the treasure trove we left behind when dad passed. All because of flat ignorance and dad was an electrical engineer. I kept a few things because I thought they were neat as a kid, but I have no idea what they are. I remember as a teenager using the CB radio a few hours before dawn, in front of a friends house, we could pick up California truckers with atmospheric skip. friends house was stucco, therefor it had a chikenwire shell. that made a difference.
  22. My house was built in 1920, so I do understand completely. things are almost, but not quite square. Choices were made that make you think "What the heck were they doing". We recently decided to insulate the attic. Prior insulation was about a half inch of dust. On the other hand. I'd rather pay for improvement projects than pay a bank on a loan.
×
×
  • Create New...