almostpractical

Thank you for directing me to that post,I had missed it. That was my concern about the inline duct fans. Through my searching I did read about adding a T to vent off the excess. So a pump to blow up a mattress should do the job? Even if it is only rated for 98 CFM? I imagine that would be the under pressure rating though.

I recently put together a coal forge from about 20 dollars of scrap steel and other odd bits. For my first day I used an electric leaf blower, what I was originally going to use didn't work out. I don't want that as a permanent solution. I was wondering if I could get some input on what would be good to replace it. I didn't some research and found a lot of information about CFM and what the blower needs to produce when under pressure since I am using coal. The links below are to some of the blowers that have been suggested/I am thinking about. inline fan There is also a 6 inch version of that fan for not much more BBQ blower I'm trying to go with the most cost effective option. I don't want to spend to much as this is my first attempt at building a forge. I made my forge out of a brake drum cover, the steal grates melted, I am going to replace them with some fire brick drilled to let air through. But any improvements are welcome. Thank you for any information and insight