kilemnik
-
Posts
3 -
Joined
-
Last visited
-
Thank you! I replaced the burner ending with a 3/4 to 1 1/4 reducer, earlier it was a 1.9'' steel pipe. Is it looks better ? Still, when the burner inside the forge I have this jumping on and off problem especially when the back of the forge is closed or half closed. I added another video about that. Gas pressure is 0.5 bar (~7 psi) Part sizes are in the drawing blew. Thanks !!! IMG_0882_Trim.mp4 IMG_0884_Trim.mp4 IMG_0888_Trim.mp4
-
Hey thank you for answering! I’ve tried to lower the psi but then the flame feels to thin and it’s still jumping on and off.. here some photos.. thanks again
-
IMG_0864_Trim.mp4 IMG_0864_Trim.mp4 IMG_0861_Trim.mp4 Hi everyone, I just build 2 propane burners. They seems to work well outside the forge housing at horizontal position but- When I insert them inside the forge there is no premixed flame as should be. I thought maybe its because the change to vertical position? or maybe related to the inner dimensions of my forge? Someone have any idea? Im attaching here some videos showing the problem. Thank you for helping! Jonathan
