IgnrntNewb

Thank you for the reply Mikey. I was hoping either you or Frosty would chime in. I'm not sure I understand which fittings you're recommending I replace. If you're referring to the 'T' fittings, I used T's with 1" inlets reduced to 3/4" as laid out in Frosty's instructions. The mixing tubes (again, if I understand correctly what you're referring to) are 3/4" nipple. In case you missed it, the last "picture" is actually a video of the burners running. Am I still missing something? Thanks again!

Every part of this is a first for me. My username is painfully accurate, so please feel free to educate. I'm in the process of building a propane forge using a double 'T' burner design. My aim is to insulate the forge to the extent that I'm left with as close to 700 cubic inches of interior volume 20191203_112828.mp4 as I can get. I've included some pictures of the burners and a video. I've been researching a lot over the past few weeks, so I hope I'm on the right track. Let me know if you see anything wrong or something I could do different/better. Thanks in advance! 20191203_114318.mp4